Make the Right Connection - BSI Cert. No. FS35209

Products

  • Harting
  • Hummel
  • Adaptaflex
  • Flexicon
  • Partex
  • PMA
  • Ronbar
  • Morsettitalia
    • Shop By

    Filter

    Accessory Type
    1. Adapter (2)
    2. Adapter frames (4)
    3. Adaptor (17)
    4. Bearing pedestal (1)
    5. Blind grommet (13)
    6. Blind plate (2)
    7. Bracket for flat cable (1)
    8. Cable entry gland (11)
    9. Cable gland (59)
    10. Cable seal (3)
    11. Cable shoe (2)
    12. Clamp (1)
    13. Coding element (8)
    14. Coding pin (2)
    15. Coding system with code pins (2)
    16. Coding system with guide pins/bushes (4)
    17. Docking frame (7)
    18. EMC clamp (25)
    19. fixing (1)
    20. Fixing element (2)
    21. Fixing plate (1)
    22. Fixing screws (4)
    23. Flange gasket (15)
    24. Frame (3)
    25. Gasket / Seal (12)
    26. Grip frame (2)
    27. Grommet (3)
    28. Half gland (21)
    29. Hexagonal adapter (2)
    30. Hinged frame (8)
    31. Identification strip (3)
    32. insert fixing screw (1)
    33. L-seal (1)
    34. Locking element with cord (1)
    35. Locking lever (11)
    36. Locking screw (1)
    37. O-ring-seal (1)
    38. Others (1)
    39. PCB adapter (2)
    40. PE contact module (2)
    41. PE Multiple ground connection (1)
    42. PE screw (3)
    43. PE terminal (1)
    44. Profile gasket (5)
    45. Reducer (11)
    46. Reduction sealing insert (2)
    47. Screw adapter (1)
    48. Set of seals (3)
    49. shielded frame (1)
    50. Shielding frame (7)
    51. Special cable gland (6)
    52. Straight cable clamp fitting (2)
    53. Thread adapter (2)
    Adapter for
    1. D-Sub 1 (3)
    2. D-Sub 2 (2)
    3. D-Sub 3 (2)
    4. D-Sub 3 in the Han® 10 A,D-Sub 4 in the Han® 16 A (1)
    5. D-Sub 4 (2)
    6. Han A® (3)
    7. Han-Quintax® (1)
    8. Size 3 A (1)
    Air pressure
    1. ≥795 hPa (9)
    2. ≥795 hPa ≈ 2000 m (6)
    Ambient temperature
    1. -25 ... +70 °C (15)
    2. -30 ... +80 °C (1)
    3. -40 ... +85 °C (45)
    Approvals
    1. DNV GL (1324)
    2. Ecolab Topactive 200,Ecolab Topactive 500,Ecolab Topax 66,Ecolab Topactive OKTO,Ecolab Topax 990,FDA 21 CFR 177.1520,FDA 21 CFR 177.2600 (12)
    3. Ecolab Topactive 200,FDA 21 CFR 177.2600,Ecolab Topactive 500,Ecolab Topax 66,Ecolab Topactive OKTO,Ecolab Topax 990,FDA 21 CFR 177.1500,FDA 21 CFR 176.170 (c),FDA 21 CFR 177.1390,FDA 21 CFR 177.1395 (4)
    4. [DNV GL] (1)
    Auto-MDI(X)
    1. Yes (7)
    Auto-negotiation
    1. Yes (7)
    China RoHS
    1. 50 (729)
    2. e (1368)
    3. [50] (1)
    Clamping range
    1. 10 ... 11 mm (1)
    2. 10 ... 12 mm (2)
    3. 10 ... 14 mm (2)
    4. 10.5 ... 14 mm (4)
    5. 11 ... 12 mm (1)
    6. 11.5 ... 15.5 mm (6)
    7. 12 ... 13 mm (1)
    8. 12 ... 20 mm (1)
    9. 13 ... 16 mm (2)
    10. 13 ... 18 mm (3)
    11. 13 ... 20 mm (1)
    12. 13 ... 21 mm (9)
    13. 13 ... 25 mm (1)
    14. 14 ... 15 mm (1)
    15. 14 ... 17 mm (3)
    16. 14 ... 18 mm (4)
    17. 16 ... 18 mm (2)
    18. 16 ... 28 mm (8)
    19. 17 ... 20.5 mm (1)
    20. 17 ... 21 mm (1)
    21. 17 ... 28 mm (2)
    22. 18 ... 25 mm (2)
    23. 20 ... 22 mm (1)
    24. 20 ... 25 mm (3)
    25. 20 ... 26 mm (2)
    26. 20 ... 32 mm (1)
    27. 22 ... 32 mm (2)
    28. 23 ... 34 mm (2)
    29. 24 ... 28 mm (2)
    30. 27 ... 32 mm (1)
    31. 29 ... 31 mm (1)
    32. 29 ... 34 mm (1)
    33. 29 ... 40 mm (1)
    34. 3 ... 4 mm (1)
    35. 32 ... 34 mm (1)
    36. 32 ... 36 mm (1)
    37. 32 ... 38 mm (1)
    38. 4 ... 5 mm (1)
    39. 4 ... 6.5 mm (2)
    40. 5 ... 12 mm (1)
    41. 5 ... 6 mm (1)
    42. 5 ... 8 mm (1)
    43. 5 ... 9 mm (2)
    44. 6 ... 12 mm (2)
    45. 6 ... 7 mm (1)
    46. 6.5 ... 12 mm (2)
    47. 6.5 ... 13.5 mm (2)
    48. 6.5 ... 16 mm (2)
    49. 6.5 ... 8.5 mm (1)
    50. 6.5 ... 9.5 mm (8)
    51. 7 ... 10.5 mm (5)
    52. 7 ... 12 mm (3)
    53. 7 ... 8 mm (1)
    54. 8 ... 10.5 mm (1)
    55. 8 ... 9 mm (1)
    56. 9 ... 10 mm (1)
    57. 9 ... 13 mm (9)
    58. 9 ... 14 mm (1)
    59. 9 ... 16 mm (2)
    60. 9 ... 18 mm (1)
    61. 9 ... 19 mm (2)
    62. 9 ... 20 mm (2)
    Clearance distance
    1. ≥ 1 mm (1)
    2. ≥ 1.2 mm (1)
    Contact spacing (termination side)
    1. 2.54 mm (1)
    Color
    1. silver (6)
    Colour (accessories)
    1. Black (53)
    2. Blue (3)
    3. Brown (1)
    4. Green (5)
    5. Grey (9)
    6. Light blue (1)
    7. Light yellow (1)
    8. Orange (1)
    9. Pink (1)
    10. RAL 7032 (pebble grey) (20)
    11. RAL 7035 (light grey) (9)
    12. RAL 7037 (dust grey) (9)
    13. RAL 9005 (jet black) (3)
    14. Red (4)
    15. Transparent (1)
    16. Violet (1)
    17. White (4)
    18. Yellow (1)
    Colour (hood/housing)
    1. Black (32)
    2. Blue (6)
    3. Grey (12)
    4. Metallic (5)
    5. RAL 5015 (sky blue) (1)
    6. RAL 7021 (black grey) (5)
    7. RAL 7032 (pebble grey) (20)
    8. RAL 7037 (dust grey) (540)
    9. RAL 9005 (jet black) (190)
    10. Silver (15)
    11. Unpainted (85)
    12. [Black] (1)
    Colour (locking)
    1. Melon yellow (4)
    2. RAL 7032 (pebble grey) (4)
    3. RAL 7037 (dust grey) (291)
    4. RAL 9005 (jet black) (18)
    Colour (seal)
    1. Black (37)
    2. Blue (15)
    3. Light grey (1)
    4. RAL 9005 (jet black) (11)
    5. Yellow (3)
    Conductor cross-section
    1. 0.08 ... 0.52 mm² (2)
    2. 0.09 ... 0.52 mm² (10)
    3. 0.14 ... 0.5 mm² (1)
    4. 0.14 ... 2.5 mm² (64)
    5. 0.14 ... 4 mm² (23)
    6. 0.14 ... 6 mm² (2)
    7. 0.22 ... 0.32 mm² Stranded,0.26 ... 0.32 mm² Solid (2)
    8. 0.25 ... 1.5 mm² (12)
    9. 0.2 ... 2.5 mm² (37)
    10. 0.5 ... 2.5 mm² (13)
    11. 0.5 ... 4 mm² (2)
    12. 0.5 ... 4 mm²,0.14 ... 2.5 mm² Signal (2)
    13. 0.75 ... 1.5 mm² (12)
    14. 0.75 ... 2.5 mm² (6)
    15. 1.5 mm² (8)
    16. 1.5 ... 10 mm² (5)
    17. 1.5 ... 16 mm² (4)
    18. 1.5 ... 16 mm²,0.5 ... 2.5 mm² Signal (4)
    19. 1.5 ... 6 mm² (10)
    20. 1.5 ... 6 mm²,0.14 ... 2.5 mm² Signal (6)
    21. 10 mm² (3)
    22. 10 ... 25 mm² (8)
    23. 10 ... 35 mm² (6)
    24. 10 ... 70 mm² (1)
    25. 14 ... 22 mm² (3)
    26. 16 mm² (5)
    27. 16 ... 35 mm² (2)
    28. 16 ... 35 mm²,0.2 ... 2.5 mm² Signal (2)
    29. 1 ... 1.5 mm² (1)
    30. 1 ... 2.5 mm² (5)
    31. 2.5 mm² (8)
    32. 2.5 ... 4 mm² (2)
    33. 2.5 ... 6 mm² (2)
    34. 2.5 ... 8 mm² (4)
    35. 2.5 ... 8 mm²,0.2 ... 2.5 mm² Signal (2)
    36. 25 mm² (5)
    37. 25 ... 40 mm² (4)
    38. 25 ... 70 mm² (2)
    39. 35 mm² (3)
    40. 35 ... 70 mm² (4)
    41. 35 ... 70 mm²,0.5 ... 2.5 mm² Signal,16 ... 35 mm² PE (2)
    42. 4 mm² (2)
    43. 40 ... 70 mm² (4)
    44. 4 ... 10 mm² (6)
    45. 4 ... 6 mm² (2)
    46. 50 mm² (2)
    47. 6 mm² (2)
    48. 6 ... 10 mm² (4)
    49. 6 ... 16 mm² (3)
    50. 6 ... 16 mm²,0.14 ... 2.5 mm² Signal (2)
    51. 70 mm² (1)
    52. 95 ... 120 mm² (2)
    53. AWG 10 (2)
    54. AWG 12 (8)
    55. AWG 14 (15)
    56. AWG 16 (16)
    57. AWG 16 ... AWG 14 (3)
    58. AWG 18 (26)
    59. AWG 18 ... AWG 13 (1)
    60. AWG 18 ... AWG 14 (23)
    61. AWG 18 ... AWG 16 (2)
    62. AWG 20 (14)
    63. AWG 20 ... AWG 12 (6)
    64. AWG 20 ... AWG 12 Stranded (1)
    65. AWG 20 ... AWG 14 (1)
    66. AWG 22 (2)
    67. AWG 22 ... AWG 18 (7)
    68. AWG 22 ... AWG 20 (2)
    69. AWG 24 (1)
    70. AWG 24 ... AWG 20 (2)
    71. AWG 24 ... AWG 22 (4)
    72. AWG 24 ... AWG 22 Stranded,AWG 23 ... AWG 22 Solid (6)
    73. AWG 24/7 ... AWG 22/7 Stranded,AWG 23/1 ... AWG 22/1 Solid (2)
    74. AWG 26 ... AWG 12 (32)
    75. AWG 26 ... AWG 14 (22)
    76. AWG 26 ... AWG 18 (11)
    77. AWG 26 ... AWG 22 (27)
    78. AWG 27 ... AWG 22 (3)
    79. AWG 27 ... AWG 22 solid and stranded (1)
    80. AWG 27 ... AWG 22 Stranded,AWG 24 ... AWG 22 Solid (2)
    81. AWG 28 ... AWG 12 (15)
    82. AWG 28 ... AWG 24 Stranded (6)
    83. AWG 8 (2)
    Conductor length
    1. ‌ 20 cm (1)
    2. ‌ 50 cm (7)
    Conductor resistance @ 20 °C
    1. ≤ 115 Ω/km (3)
    2. ≤ 120 Ω/km (8)
    3. ≤ 145 Ω/km (3)
    4. ≤ 290 Ω/km (5)
    Connection type
    1. 2x type A jack - type A connector (1)
    2. Jack to connector (3)
    3. Jack to jack (2)
    4. Motherboard to daughtercard,Extender card,PCB to cable (1)
    5. Type A jack - type A connector (6)
    6. Type A jack - type A jack (2)
    7. Type mini B jack - type A connector (1)
    Connector 1
    1. Han® 3 A Metal (3)
    2. Han® Q 4/2 (1)
    3. HARTING PushPull (V4) Thermoplastic (1)
    4. HARTING RJ Industrial® (33)
    5. M12 D-coding,Male Straight (1)
    6. RJ45 (1)
    7. USB 2.0,Type A,Male (1)
    Connector 2
    1. Han® 3 A Metal (3)
    2. Han® Q 4/2 (1)
    3. HARTING PushPull (V4) Thermoplastic (1)
    4. HARTING PushPull (V4) Thermoplastic,Connector (1)
    5. HARTING RJ Industrial® (31)
    6. USB 2.0,Type A,Male (1)
    Contact identification
    1. 1 groove (6)
    2. 1 groove On the back crimp collar (4)
    3. 109 ... 216 (2)
    4. 17 ... 32 (8)
    5. 2 grooves (8)
    6. 25 ... 48 (6)
    7. 3 grooves (5)
    8. 33 ... 64 (2)
    9. 47 ... 92 (2)
    10. 7 ... 12 (2)
    11. 73 ... 144 (2)
    12. acc. to IEC 60584 type J (4)
    13. No groove (12)
    14. Wide groove (2)
    Contact resistance
    1. ≤ 0.2 mΩ (16)
    2. ≤ 0.3 mΩ (35)
    3. ≤ 0.5 mΩ (20)
    4. ≤ 1 mΩ (103)
    5. ≤ 10 mΩ (53)
    6. ≤ 2 mΩ (16)
    7. ≤ 20 mΩ (1)
    8. ≤ 3 mΩ (73)
    9. ≤ 4 mΩ (46)
    10. ≥ 4 mΩ (1)
    Contact resistance, shielding
    1. ≤ 100 mΩ (10)
    Contact rows
    1. 3 (1)
    Contact spacing (mating side)
    1. 2.54 mm (1)
    Country of origin
    1. Belgium (2)
    2. China (8)
    3. Croatia (1)
    4. Czechia (5)
    5. France (1)
    6. Germany (1834)
    7. Hungary (5)
    8. India (9)
    9. Latvia (26)
    10. Romania (200)
    11. Switzerland (5)
    12. Taiwan (4)
    13. [Germany] (1)
    Coupling attenuation @ 20 °C / 100 MHz
    1. ‌ 20 mΩ/m (3)
    2. ≤ 10 mΩ/m (2)
    Creepage distance
    1. ≥ 1 mm (1)
    2. ≥ 1.2 mm (1)
    Description of hood/housing
    1. Angled (10)
    2. Angled,4 fixing screws (1)
    3. Angled,Bottom closed,Feed through hole for fixing screws (1)
    4. Angled,With three through holes for fixing screws (2)
    5. Black (5)
    6. Bottom closed (3)
    7. Compact (3)
    8. Compact,With board locks,With integrated seal (1)
    9. EasyInstall (4)
    10. Flat cable entry (3)
    11. for bulkhead mounted housings,for cable to cable housing,With fixing cord (1)
    12. for bulkhead mounted housings,for surface mounted housings (6)
    13. for bulkhead mounted housings,for surface mounted housings,for cable to cable housing,Metal,With fixing cord (1)
    14. for bulkhead mounted housings,for surface mounted housings,for cable to cable housing,With fixing cord (2)
    15. for bulkhead mounted housings,for surface mounted housings,Metal,With fixing cord (1)
    16. for bulkhead mounted housings,for surface mounted housings,Thermoplastic (1)
    17. for bulkhead mounted housings,for surface mounted housings,Thermoplastic,With seal (2)
    18. for bulkhead mounted housings,Metal (1)
    19. for bulkhead mounted housings,Metal,for surface mounted housings (2)
    20. for bulkhead mounted housings,Thermoplastic (4)
    21. for bulkhead mounted housings,Thermoplastic,for surface mounted housings (4)
    22. for cable to cable housing,for bulkhead mounted housings,Metal (1)
    23. for cable to cable housing,With fixing cord,for bulkhead mounted housings,Metal,for surface mounted housings (6)
    24. for cable to cable housing,With fixing cord,for bulkhead mounted housings,Thermoplastic,for surface mounted housings (1)
    25. for cable to cable housing,With fixing cord,Metal (6)
    26. for cable to cable housing,With seal,With fixing cord,Metal (1)
    27. for flexible conduits Adaptaflex PAFS18 (1)
    28. for Han-Brid®,With glued seal (3)
    29. for Han-Compact® half cable gland (6)
    30. for Han-Compact® half cable gland,for Han® Q 8/0 Crimp (max. 400 V), Han® Q17/0 and Han® Q Data RJ45 (3)
    31. for Han-Compact® half cable gland,With separate PE terminating point,for all inserts of size Han-Compact® (1)
    32. for hoods (3)
    33. for hoods,Metal (2)
    34. for hoods,Metal,With fixing cord (7)
    35. for hoods,Thermoplastic (1)
    36. for hoods,Thermoplastic,With fixing cord (1)
    37. for hoods,Thermoplastic,With fixing cord,With seal (1)
    38. for hoods,With board locks,Thermoplastic (1)
    39. for hoods,With fixing cord (1)
    40. for hoods,With fixing cord,Metal (11)
    41. for hoods,With seal,With fixing cord,Metal (1)
    42. for rectangular panel cut out (1)
    43. for standard cable gland,for all inserts of size Han-Compact®,With separate PE terminating point (1)
    44. for standard cable gland,With separate PE terminating point,for all inserts of size Han-Compact® (2)
    45. Internal seal (5)
    46. O-Ring seal,With metal cover (1)
    47. Open bottom (2)
    48. Open bottom,for assembly of bulkhead mounted bulkhead mounted position (3)
    49. Powder-coated (2)
    50. Powder-coated,With thermo-plastic cover (1)
    51. Push button, slot (2)
    52. Special type (3)
    53. Straight (19)
    54. Straight,With metal cover,With seal (1)
    55. Straight,With three through holes for fixing screws (2)
    56. Thermoplastic (1)
    57. With adapter (6)
    58. With fixing cord,for bulkhead mounted housings,Metal,for surface mounted housings (6)
    59. With fixing cord,for bulkhead mounted housings,Thermoplastic,for surface mounted housings (1)
    60. With fixing cord,Thermoplastic (1)
    61. With fixing hole (1)
    62. With glued seal (3)
    63. With glued seal,for Han-Brid® (5)
    64. With integrated cable gland (23)
    65. With metal cover (25)
    66. With metal cover,Straight (1)
    67. With PE identification (pin 1 = PE) (1)
    68. With seal,for bulkhead mounted housings,Thermoplastic (1)
    69. With seal,With fixing cord,for bulkhead mounted housings,Metal,for surface mounted housings (1)
    70. With seal,With fixing cord,for bulkhead mounted housings,Thermoplastic,for surface mounted housings (1)
    71. With thermo-plastic cover (72)
    72. With thermo-plastic cover,O-Ring seal (1)
    73. With three through holes for fixing screws (1)
    74. [Straight] (1)
    Description of the accessory
    1. + 2 pressure plates (6)
    2. + 2 pressure plates,Multiple (6)
    3. Additional strain relief can be provided by cable ties (max. width 8 mm) (4)
    4. Angled (1)
    5. B-coding (1)
    6. Bottom part (1)
    7. D-coding,4-pin,Straight (2)
    8. D-coding,Angled,4-pin (1)
    9. EMC version (22)
    10. EMC version,for hoods (3)
    11. Fixed,for 3 modules,a ... c (1)
    12. Fixed,for 4 modules,a ... d (1)
    13. Flat assembly (1)
    14. Float mount,for 3 modules,A ... C (1)
    15. for 1 flat cable,With strain relief clamp (1)
    16. for 1 module,In housing Han® 10 A (1)
    17. for 1 x D-Sub (8)
    18. for 2 modules,a ... b (1)
    19. for 2 modules,A ... B (1)
    20. for 2x D-Sub (2)
    21. for 3 flat cables,With strain relief clamp (1)
    22. for 3 modules,A ... C (1)
    23. for 3 modules,a ... c (1)
    24. for 4 modules,A ... D (1)
    25. for 4 modules,a ... d (1)
    26. for 6 modules,a ... f (1)
    27. for 6 modules,A ... F (1)
    28. for application “insert in hood/housing”,With guide pins/bushes (2)
    29. for bearing pedestal (8)
    30. for bulkhead mounted housings (3)
    31. for bulkhead mounted housings,for Han-Yellock® 30 (1)
    32. for bulkhead mounted housings,for Han-Yellock® 60 (1)
    33. for bulkhead mounted housings,for hoods, high construction (4)
    34. for bulkhead mounted plastic housings, straight (1)
    35. for carrier hoods,for Han-Yellock® 30 (1)
    36. for carrier hoods,for Han-Yellock® 60 (1)
    37. for device side (1)
    38. for device side,With fixing cord (1)
    39. for female inserts,4x Han® HC Modular 250 (1)
    40. for female inserts,with cable clip (1)
    41. for Han-Modular® hinged frames (1)
    42. for Han® 10 A, 16 A, 32 A, 6 B, 10 B, 16 B, 24 B (1)
    43. for Han® 1A inserts with single locking lever (1)
    44. for hoods (2)
    45. for hoods, high construction,for bulkhead mounted housings (1)
    46. for hoods,for cable to cable housing (4)
    47. for hoods,With board locks (3)
    48. for housings (2)
    49. for label 09 45 502 0003 (1)
    50. for label holder 09 45 502 0002 (1)
    51. for male inserts,for female inserts,2x Han® HC Modular 350 (1)
    52. for motor connection (2)
    53. for PE extension (2)
    54. for SC module (1)
    55. for separate mounting (1)
    56. for shield frames (1)
    57. for single wire seal for a partial assembly (1)
    58. for surface mounted housings (2)
    59. for wall mounting (1)
    60. Free space for self assembly of connectors or switches: 45 x 75 mm (1)
    61. Han-Power® S (4)
    62. Han® 25 D,Han A®,Han® 15 D (1)
    63. Han® 3 A (1)
    64. Han® 6/10/16/24 HPR (1)
    65. Han® Easy Hood (3)
    66. Han® HPR (1)
    67. Han® HPR,Thread M6 (4)
    68. Han® HsB,Han-Com® (1)
    69. Han® Q 8/0 (1)
    70. In the Han DD® crimp insert,In the Han DD® module,In the Han® DDD module (different electrical data: 7.5 A 160 V 2.5 kV 3) (1)
    71. In the Han E® crimp insert (1)
    72. Metal (1)
    73. Multi contour (MK) (1)
    74. Only for swinging insert mountings (2)
    75. Self-retaining (4)
    76. Silicone,for 12 contacts (1)
    77. Silicone,for 4 contacts (2)
    78. Silicone,for 6 contacts (1)
    79. Straight (1)
    80. Swinging,for Han-Modular® hinged frames (1)
    81. Swinging,for standard inserts (1)
    82. Vertical (1)
    83. With carrier element,Type 6/10 (1)
    84. With carrier element,Type 6/24 (1)
    85. With code pins (1)
    86. With code pins,Han® B (1)
    87. With cord,for Han® 10/16/24 B housings bulkhead mounting with Han-Easy Lock® double levers (1)
    88. With cutting seal (7)
    89. With guide pins/bushes,for application “insert in hood/housing” (2)
    90. With O-ring (20)
    91. With perforated cut-outs for gender changer RJ45, USB and D-Sub 3 (1)
    92. With screw adapter and screw to use in connection with 09 00 000 5602 (1)
    93. With seal,Han® 3 A (1)
    94. With simple seal (7)
    95. With strain relief (9)
    96. With strain relief clamp,for 2 flat cables (1)
    Description of the cable
    1. Angled bottom (2)
    2. for railway applications (2)
    3. Halogen-free,Oil resistant (10)
    4. Straight (5)
    5. Wiring 1:1,Halogen-free,Oil resistant (12)
    Description of the contact
    1. Angled (1)
    2. for 1 mm plastic fibre (2)
    3. for 1 mm plastic fibre Fast termination (1)
    4. for cables RG 174 U, 188 AU, 316 U (2)
    5. for cables RG 179 BU, 187 AU (2)
    6. for cables RG 58 (2)
    7. for GI fibre 50/125 μm for ceramic ferrule 62.5/125 μm (3)
    8. for Han D® crimp contacts (4)
    9. for Han E® crimp contacts (2)
    10. for Han® D-Sub crimp contacts (2)
    11. Multimode (1)
    12. Relay contact (3)
    13. Stamped,Straight (1)
    14. Straight (5)
    15. With shut-off Polypropylen Straight (4)
    16. Without shut-off Straight (8)
    17. [Multimode] (1)
    Description of the module
    1. Adapter,for patch cable (1)
    2. for D-Sub 1 (9-pin) (4)
    3. for Han E® crimp contacts (2)
    4. for patch cable (2)
    5. for screw termination (1)
    6. Gender changer,for patch cable (1)
    7. Han® Gigabit module,Han® Shielded module,Han® Megabit module (2)
    8. Single module (3)
    9. Single module,for patch cable (1)
    10. with ceramic ferrule 62.5/125 μm (1)
    Description of the tool
    1. for HARTING RJ Industrial® Gigalink connectors (1)
    2. Han® F+B,for circular inserts (1)
    3. Suitable for HARTING RJ Industrial® (1)
    Details
    1. ATTENTION! Only to be used with Han® Ex hoods and housings! (1)
    2. Black slide (8)
    3. Black slide,Please order crimp contacts separately. (2)
    4. Blue slide (10)
    5. Blue slide,Please order crimp contacts separately. (2)
    6. Cable side (2)
    7. Can only be used with screw adapter! (1)
    8. Coding bottom left = Cable entry direction on the angled connector: to the right (1)
    9. Coupler, without thread in the termination area (1)
    10. Device side (3)
    11. Device side,Lower part, unloaded (2)
    12. Finger safe (4)
    13. for crimp inserts only,With loss of one contact (1)
    14. for data connectors (1)
    15. For Fast Ethernet applications only (7)
    16. for female inserts (1)
    17. for hoods/housings high construction only (2)
    18. for male inserts (1)
    19. for male inserts,for female inserts (1)
    20. for metal hoods / housings (2)
    21. for mounted female insert (5)
    22. for mounted female insert or for mounted Han-Brid® insert (5)
    23. for mounted male insert (8)
    24. for one cable (2)
    25. for PCB´s up to 1.6 mm (1)
    26. for thermoplastic hoods / housings (2)
    27. for thermoplastics and metal hoods/housings (2)
    28. for two cables (2)
    29. Guide bushing opposite side (1)
    30. Guide pin opposite side (1)
    31. Not mating compatible to Han Hv E® screw/crimp termination (6)
    32. Only for crimp termination,With loss of one contact (1)
    33. Only for thermoplastic hoods / housings (2)
    34. Optional (1)
    35. Optionally mountable to terminal block connectors (1)
    36. Order 2 pieces for one connector. (2)
    37. Panel feed through,Straight (1)
    38. Panel feed through,With 4-pin terminal block (1)
    39. Please order 4 pieces for one connector. (4)
    40. Please order cable entry seals separately. (2)
    41. Please order contacts separately. (6)
    42. Please order contacts separately.,Please order fixing plate separately. (1)
    43. Please order contacts separately.,Using of guiding pins is imperative! (2)
    44. Please order crimp contacts separately. (122)
    45. Please order crimp contacts separately.,4x Han E®,4x Han D®,4x M12 for data element,incl. Ethernet element (2)
    46. Please order crimp contacts separately.,for thermoplastics and metal hoods/housings (2)
    47. Please order crimp contacts separately.,Only for thermoplastic hoods / housings (2)
    48. Please order crimp contacts separately.,Please order adapter module separately.,Please order cable clamp or crimp flange separately. (2)
    49. Please order crimp contacts separately.,You need two inserts for a complete assembly! (16)
    50. Please order patch cable separately. (1)
    51. Pull-in-range x-axis: ± 1.5 mm,Pull-in-range y-axis: ± 1.5 mm (1)
    52. Pull-in-range y-axis: ± 1.5 mm,Pull-in-range x-axis: ± 1.5 mm (3)
    53. Size 10 A / 16 A by using the corresponding adapter! (2)
    54. Size 16 A by using the corresponding adapter! (1)
    55. to reach the electrical data up to 4000 V 18 kV 3 (2)
    56. two terminations per contact,for hoods/housings high construction only (6)
    57. USB 2.0 (3)
    58. Use 2x fixing screws M3 (3)
    59. Version with passive locking with plastic cord for fixing screw M3 (1)
    60. When installing a PROFINET system, observe the PROFINET installation guideline. (2)
    61. When removing the contacts, the two-piece module can be opened using a 7mm screwdriver. This destroys the module. (2)
    62. With 09 99 000 0830 HARTING Crimping tool also cable up to 25 mm² with ferrule adaptable,Not for Han-Modular® hinged frames! (2)
    63. With cage clamp (2)
    64. With RJ Industrial (1)
    65. With Stewart RJ45 (1)
    66. without lock nut (1)
    67. You need two inserts for a complete assembly! (10)
    Degree of protection acc. to IEC 60529
    1. IP20 (68)
    2. IP30 when mated (15)
    3. IP40 (1)
    4. IP44,IP65 / IP67 with seal screw 09 20 000 9918 (48)
    5. IP44,IP67 with seal screw 09 20 000 9918 (29)
    6. IP54 (2)
    7. IP54 when mounted vertically,IP65 (2)
    8. IP65 (627)
    9. IP65 / IP67 (2)
    10. IP65 / IP67 when mated (33)
    11. IP65 / IP67 with seal screw 09 20 000 9918,IP44 (9)
    12. IP65 in locked position (6)
    13. IP65 when mated,IP67 when mated (1)
    14. IP65 With cable gland (1)
    15. IP65,IP67 (52)
    16. IP65,IP67 in combination with special bulkhead mounted housings (141)
    17. IP65,IP68 (12)
    18. IP65,IP68,IP69 / IPX9K acc. to ISO 20653 (56)
    19. IP67 (5)
    20. IP67 / IP69 (4)
    21. IP67 in locked position (4)
    22. IP67 in locked position,IP6K9K acc. to ISO 20653 (12)
    23. IP67 when mated (5)
    24. IP67 with seal screw 09 20 000 9918,IP44 (3)
    25. IP68 (52)
    26. IP68,IP69 / IPX9K acc. to ISO 20653 (23)
    27. [IP65|IP67] (1)
    Distance assembly fixing holes
    1. 68 mm (1)
    2. 70 mm (1)
    eCl@ss
    1. 19170130 Network switch (general application) (16)
    2. 19179190 Network technology (computer communication, parts, unspecified) (2)
    3. 21049090 Hand tool (other, unspecified) (3)
    4. 23071601 O-ring (1)
    5. 27060304 Appliance cord (data cable) (15)
    6. 27060307 Bus cable (1)
    7. 27060390 Ready-made data cable (unspecified) (9)
    8. 27060501 Hybrid cable (2)
    9. 27061801 Data and communication cable (copper) (19)
    10. 27142409 Small distribution board (6)
    11. 27144021 Device connection box (5)
    12. 27144421 Feed through spout (14)
    13. 27144432 Screwed cable gland (electr.) (124)
    14. 27144433 Blind plug (electr.) (12)
    15. 27182810 Cover/infill panel/identification strip (electrical cabinet) (4)
    16. 27182890 Elements for switching cabinet, housing, rack (unspecified) (9)
    17. 27440101 Rectangular connectors (set) (43)
    18. 27440102 Circular connector (for field assembly) (37)
    19. 27440103 Sensor-actuator connector chassis (sensor technology acc.) (8)
    20. 27440190 Industry connector (unspecified) (4)
    21. 27440201 Adapter plate industrial connectors (24)
    22. 27440202 Shell for industrial connectors (846)
    23. 27440203 Coding for industrial connectors (21)
    24. 27440204 Contact for industrial connectors (143)
    25. 27440205 Contact insert for industrial connectors (317)
    26. 27440206 Module carrier frame for industrial connectors (15)
    27. 27440208 Cap for industrial connectors (99)
    28. 27440210 Fixing element for industrial connectors (18)
    29. 27440214 D-Sub coupler (1)
    30. 27440217 Module for industrial connectors (power/signals) (72)
    31. 27440218 Module for industrial connectors (data) (35)
    32. 27440219 Module for industrial connectors (FO) (2)
    33. 27440220 Module for industrial connectors (pneumatic) (2)
    34. 27440223 Contact insert for circular connectors (4)
    35. 27440224 Shell for circular connectors (8)
    36. 27440291 Connector component (parts) (34)
    37. 27440292 Connector component (accessories) (25)
    38. 27440302 D-Sub-Connector (1)
    39. 27440392 Connector (accessories) (60)
    40. 27440402 PCB connector (6)
    41. 90909090 Interim classification (unspecified) (1)
    42. Patch cord copper (data cable ) (31)
    43. [27440101 Rectangular connectors (set)] (1)
    EG1935/2004
    1. compliant (12)
    Element
    1. Cable connector (49)
    2. Cable connector,Panel feed through (4)
    3. Connector (1)
    4. Connector sets (6)
    5. Coupler (1)
    6. Data connectors (10)
    7. Distributor (1)
    8. Double coupling (2)
    9. Energy distributor (6)
    10. Female (2)
    11. Frames (4)
    12. Gender changer (3)
    13. Industrial Ethernet Switches (16)
    14. Inserts (1)
    15. Male connector (1)
    16. Module (2)
    17. Multiplier (1)
    18. Panel feed through (24)
    19. Panel feed through set (3)
    20. Panel feed trough set (6)
    21. PCB adapter (1)
    22. Power module (1)
    23. Service interfaces (15)
    24. Socket (5)
    25. Terminal block connector (46)
    26. [Cable connector] (1)
    ELV status
    1. compliant (1367)
    2. compliant with exemption (729)
    3. not compliant (1)
    4. [compliant with exemption] (1)
    Energie Efficient Ethernet
    1. Yes (16)
    EtherNet/IP
    1. Yes (16)
    European customs tariff number
    1. 39174000 (3)
    2. 39269097 (35)
    3. 40169300 (47)
    4. 73072910 (1)
    5. 73181558 (10)
    6. 73181900 (6)
    7. 74122000 (2)
    8. 74199990 (2)
    9. 82055980 (2)
    10. 82073090 (1)
    11. 84849000 (101)
    12. 85176200 (16)
    13. 85177000 (2)
    14. 85359000 (8)
    15. 85365080 (1)
    16. 85366910 (6)
    17. 85366990 (526)
    18. 85367000 (8)
    19. 85369010 (3)
    20. 85389099 (1243)
    21. 85442000 (1)
    22. 85444210 (1)
    23. 85444290 (62)
    24. 85444995 (13)
    25. [85389099] (1)
    FCC
    1. Yes (15)
    Features
    1. Intuitive locking mechanism (2)
    2. Intuitive locking mechanism,field assembly without tolls (2)
    3. lead-free (1)
    4. Suitable for PoE++ (2)
    Field of application
    1. Connector for food+beverage industry (12)
    2. Connectors for explosion hazardous environments (1)
    3. for motor connection (1)
    4. France (UTE) (1)
    5. Germany (VDE) (1)
    6. Great Britain (BS) (1)
    7. Hoods/housings for harsh environments (7)
    8. Hoods/housings for harsh outdoor environments (68)
    9. Hoods/Housings for higher EMC requirements (66)
    10. Hoods/housings for industrial applications (30)
    11. Hoods/housings for rough environments (68)
    12. Special hoods and housings for high mating cycles (8)
    13. Special hoods/housings for Han Hv E® screw terminal (14)
    14. Standard Hoods/housings for industrial applications (135)
    15. Standard hoods/housings for industrial connectors (442)
    16. USA,Euro (1)
    17. USA,Japan (1)
    Fixing
    1. 35 mm DIN rail acc. to EN 60715 (16)
    2. Screwable in cover plates (24)
    3. Screwable to cover plates (2)
    4. Wall mounting (2)
    Flammability
    1. flame retardant, halogen-free (11)
    Floating tolerance
    1. ± 2 mm (1)
    Flow control
    1. Off (16)
    further information
    1. 2 pinsHan® HC Modular 350 (1)
    2. additional strain relief can be provided by cable ties (max. width 8 mm) (4)
    3. angled (1)
    4. bulkhead mounting (1)
    5. Bush (1)
    6. double locking levergrey (3)
    7. fixedfor 3 modules (1)
    8. fixedfor 4 modules (1)
    9. float mountfor 3 modules (1)
    10. for 1 modulein housing Han® 10 A (1)
    11. for 1 x D-Sub (4)
    12. for 1 x D-Submetal (1)
    13. for 1 x D-Subplastic (2)
    14. for 2 modules (2)
    15. for 2 x D-Sub (2)
    16. for 3 modules (2)
    17. for 4 modules (2)
    18. for 6 modules (2)
    19. for all sizes (1)
    20. for application "insert in hood/housing" (4)
    21. for bulkhead mounted plastic housings, straight (1)
    22. for cable to cable housings (1)
    23. for female insertsHan® HC Modular 2504 pins (1)
    24. for Han A®, Han® 15, 25 D (1)
    25. for Han® 10/16/24 B housings bulkhead mounting with Han-Easy Lock® double levers (1)
    26. for Han® 6/10/16/24 HPR (1)
    27. for Han-Com®, Han® HsB (1)
    28. for Han-Modular® hinged frames (1)
    29. for Han-Yellock® 30for carrier hoods (1)
    30. for Han-Yellock® 30for housings bulkhead mounting (1)
    31. for Han-Yellock® 60for carrier hoods (1)
    32. for Han-Yellock® 60for housings bulkhead mounting (1)
    33. for hoods (3)
    34. for hoodsfor cable to cable housings (1)
    35. for hoodsfor cable to cable housingsblack (2)
    36. for hoodsmetal (2)
    37. for housings bulkhead mounting (4)
    38. for housings bulkhead mounting and hoods high construction (2)
    39. for housings bulkhead mounting and hoods high construction24 B (2)
    40. for inserts size 6 B - 24 B (1)
    41. for motor connection (1)
    42. for PCB´s up to 1.6 mmin the Han DD® crimp insertin the Han DD® modulein the Han® DDD module (different electrical data: 7.5 A 160 V 2.5 kV 3) (1)
    43. for PE extension (2)
    44. for SC module (1)
    45. for separate mounting (1)
    46. for shield frames (1)
    47. for surface mounted housings (2)
    48. for the Han® 3 A (1)
    49. FPM (1)
    50. free space for self assembly of connectors or switches: 45 x 75 mm (1)
    51. in the Han E® crimp insert (1)
    52. IP65 / IP67for the Han® 3 A (1)
    53. metal (20)
    54. metalwith screw adapter and screw (1)
    55. Multi-Contour (MK) (1)
    56. only for swinging insert mountings (2)
    57. plastic (8)
    58. Screw pin (1)
    59. single locking levergrey (6)
    60. single locking leverHan® Q 8/0 (1)
    61. straight (1)
    62. with cutting seal (8)
    63. with O-ring (2)
    64. with perforated cut-outs for gender changer RJ45, USB and D-Sub 25 (1)
    65. with screw terminal (2)
    66. with simple seal (8)
    67. with strain relief (8)
    68. with strain relief clampfor 1 flat cable (1)
    69. with strain relief clampfor 2 flat cables (1)
    70. with strain relief clampfor 3 flat cables (1)
    71. zinc die-cast (1)
    10/100/1000 Mbit/s (RJ45-Ports)
    1. 5 x (2)
    10/100 Mbit/s (RJ45-Ports)
    1. 4 (1)
    2. 5 (1)
    3. 6 (1)
    4. 8 (2)
    Han-Easy Lock®
    1. Yes (300)
    Han-Easy Lock®
    1. Yes (299)
    Category
    1. Accessories (373)
    2. Bulk cables (21)
    3. Cable assemblies (41)
    4. Connector sets (3)
    5. Connectors (114)
    6. Contacts (143)
    7. Energy distributors (6)
    8. Hoods/Housings (932)
    9. Inserts (331)
    10. Modules (98)
    11. Sockets (18)
    12. Tools (3)
    13. [Connectors] (1)
    Hot plugging
    1. No (2)
    Identification
    1. 12/0 (4)
    2. 17/0 (2)
    3. 2/0 (4)
    4. 2/0 High Voltage (4)
    5. 250 (1)
    6. 3/0 (1)
    7. 350 (4)
    8. 4/2 (4)
    9. 5/0 (6)
    10. 7/0 (2)
    11. 8/0 (3)
    12. Han E® (5)
    13. Han-Brid® Cu (13)
    14. Han-Brid® Quintax 3 A (2)
    15. Han-Brid® RJ45 C (4)
    16. Han-Brid® USB (1)
    17. Han® K 12/2 (2)
    18. Han® K 3/0 (2)
    19. Han® K 3/2 (2)
    20. Han® K 4/0 (2)
    21. Han® K 4/2 (2)
    22. Han® K 4/4 (2)
    23. Han® K 4/8 (2)
    24. Han® K 6/12 (2)
    25. Han® K 6/36 (2)
    26. Han® K 6/6 (2)
    27. Han® K 8/0 (2)
    28. Han® K 8/24 (2)
    29. M12-L (16)
    30. M12-S (2)
    31. M8-S (4)
    32. Power (5)
    33. Power L (1)
    34. RJ45 (8)
    35. Standard (1)
    36. Type C (1)
    Impedance @ 100 MHz
    1. ‌100 Ω ±15 % (2)
    2. ‌100 Ω ±5 % (17)
    Insert
    1. Han® K 12/2 (2)
    2. Han® K 3/0 (2)
    3. Han® K 3/2 (2)
    4. Han® K 4/0 (2)
    5. Han® K 4/2 (2)
    6. Han® K 4/4 (2)
    7. Han® K 4/8 (2)
    8. Han® K 6/12 (2)
    9. Han® K 6/36 (2)
    10. Han® K 6/6 (2)
    11. Han® K 8/0 (2)
    12. Han® K 8/24 (2)
    Insertion and withdrawal force
    1. ≤ 30 N (1)
    Insertion force
    1. ≤ 30 N (1)
    Insulation resistance @ 20 °C
    1. ≥ 5,000 MΩ x km (3)
    2. ≥ 500 MΩ x km (16)
    Isolation group
    1. I (600 ≤ CTI) (46)
    2. IIIa (175 ≤ CTI < 400) (1)
    Limiting temperature
    1. -10 ... +60 °C (7)
    2. -10 ... +70 °C (3)
    3. -20 ... +40 °C (1)
    4. -20 ... +70 °C (3)
    5. -20 ... +80 °C (5)
    6. -30 ... +75 °C unmoved,-5 ... +50 °C moved (22)
    7. -30 ... +90 °C (20)
    8. -40 ... +100 °C (47)
    9. -40 ... +125 °C (1317)
    10. -40 ... +125 °C,-40 ... +200 °C With Han® High Temp components (26)
    11. -40 ... +130 °C (22)
    12. -40 ... +200 °C With Han® High Temp components (3)
    13. -40 ... +70 °C (59)
    14. -40 ... +70 °C unmoved,-20 ... +60 °C moved (3)
    15. -40 ... +75 °C (3)
    16. -40 ... +80 °C (14)
    17. -40 ... +85 °C (30)
    18. -40 ... +90 °C (2)
    19. -45 ... +60 °C (1)
    20. -55 ... +125 °C (1)
    21. -55 ... +125 °C (1)
    22. [-40 ... +70 °C] (1)
    Lock-in range
    1. ± 4 mm (3)
    MAC table size
    1. 1k Entries (9)
    2. 2k Entries (1)
    3. 8k Entries (5)
    Manufacturing process
    1. Turned contacts (143)
    Marking
    1. A ... B (1)
    2. a ... b (1)
    3. A ... C (2)
    4. a ... c (2)
    5. A ... D (1)
    6. a ... d (2)
    7. A ... F (1)
    8. a ... f (1)
    Material
    1. Polycarbonate (PC) (3)
    2. Zinc die-cast (8)
    Material (accessories)
    1. Aluminium die-cast (4)
    2. Metal (42)
    3. NBR (1)
    4. Polyamide (PA) (8)
    5. Polycarbonate (PC) (16)
    6. Polycarbonate (PC),Stainless steel (9)
    7. Stainless steel (6)
    8. Steel, zinc plated (13)
    9. Thermoplastic (47)
    10. VA 1.4305 (4)
    11. Zinc die-cast (4)
    Material (cable glands)
    1. Brass (16)
    2. Metal (69)
    3. Polyamide (PA) (14)
    4. Stainless steel (1)
    5. Thermoplastic (18)
    Material (cable seal)
    1. NBR (1)
    2. TPE (1)
    Material (clamping ring)
    1. Polyamide (PA) (15)
    Material, contact
    1. constantan (4)
    2. copper alloy (303)
    3. delrin acetal (12)
    4. iron (4)
    Material (contacts)
    1. Brass (28)
    2. Constantan (4)
    3. Copper alloy (354)
    4. Delrin acetal (12)
    5. Iron (4)
    Material (hood/housing)
    1. Aluminium (3)
    2. Aluminium (anodised) (6)
    3. Aluminium (anodised),Steel sheet (powder-coated) (9)
    4. Aluminium die-cast (633)
    5. Aluminium die-cast,Corrosion resistant (54)
    6. Copper-zinc alloy (3)
    7. Corrosion resistant,Aluminium die-cast (5)
    8. Polyamide (PA) (22)
    9. Polyamide (PA),Fibre-glass reinforced (25)
    10. Polyamide (PA),Zinc die-cast (16)
    11. Polyamide (PA),Zinc die-cast,Thermoplastic polyurethane (TPU) (2)
    12. Polycarbonate (PC) (62)
    13. Polycarbonate (PC),Fibre-glass reinforced (1)
    14. Polypropylen (12)
    15. Stainless steel (5)
    16. Thermoplastic (15)
    17. Zinc die-cast (134)
    18. [Zinc die-cast] (1)
    Material (internal seal)
    1. NBR (1)
    Material (locking)
    1. Polyamide (PA) (14)
    2. Polyamide (PA),Fibre-glass reinforced (13)
    3. Polyamide (PA),Stainless steel (6)
    4. Polycarbonate (PC),Stainless steel (291)
    5. Stainless steel (110)
    6. Steel (24)
    Material (O-ring)
    1. NBR (2)
    Material, screwing
    1. brass (2)
    2. metal (111)
    3. stainless steel (78)
    4. thermoplastic (37)
    5. zinc die-cast (4)
    Material (shielding)
    1. Zinc die-cast, nickel-plated (10)
    Minimum bending radius
    1. 5x Cable diameter (repeated bending),3x Cable diameter (singular bending) (3)
    2. 7.5x Cable diameter (repeated bending),3x Cable diameter (singular bending) (3)
    3. 7x Cable diameter (repeated bending),3x Cable diameter (singular bending) (3)
    4. 8x Cable diameter (repeated bending),4x Cable diameter (singular bending) (8)
    Mating cycles with other HMC components
    1. ≥ 10,000 (41)
    2. ≥ 3,000 (2)
    Material flammability class acc. to UL 94
    1. HB (33)
    2. V-0 (559)
    Material flammability class acc. to UL 94 (locking levers)
    1. V-0 (320)
    Nominal current
    1. ‌ 13 A (1)
    2. ‌ 15 A (1)
    3. ‌ 16 A (3)
    Nominal voltage
    1. 24 V DC,48 V DC (14)
    2. 24 V DC,48 V DC,54 V DC (2)
    Non blocking
    1. Yes (16)
    Number of cores
    1. 4 (19)
    2. 6 (1)
    3. 8 (41)
    Number of relockings
    1. < 10 (4)
    2. ≥ 100 (1)
    3. ≥ 500 (25)
    Operating current
    1. <134 mA @ 24 V DC,<69 mA @ 48 V DC (2)
    2. <142 mA @ 24 V DC,<77 mA @ 48 V DC (1)
    3. <149 mA @ 24 V DC,<77 mA @ 48 V DC (1)
    4. <180 mA @ 24 V DC,<1,440 mA @ 48 V DC,<2,430 mA @ 54 V DC (1)
    5. <182 mA @ 24 V DC,<95 mA @ 48 V DC (1)
    6. <220 mA @ 24 V DC,<114 mA @ 48 V DC (1)
    7. <230 mA @ 24 V DC (1)
    8. <37 mA @ 24 V DC,<20 mA @ 48 V DC (1)
    9. <42 mA @ 24 V DC,<23 mA @ 48 V DC (2)
    10. <58 mA @ 24 V DC,<31 mA @ 48 V DC (1)
    11. <75 mA @ 24 V DC,<40 mA @ 48 V DC (2)
    12. <80 mA @ 24 V DC,<1,400 mA @ 48 V DC,<2,400 mA @ 54 V DC (1)
    13. <85 mA @ 24 V DC,<46 mA @ 48 V DC (1)
    14. ≤ 1.5 A (6)
    15. ≤ 10 A (33)
    16. ≤ 100 A (9)
    17. ≤ 16 A (47)
    18. ≤ 20 A (2)
    19. ≤ 200 A (3)
    20. ≤ 250 A (1)
    21. ≤ 40 A (10)
    22. ≤ 7.5 A (3)
    23. ≤ 70 A (6)
    Operating temperature
    1. -40 ... +70 °C (4)
    2. ‌0 ... +55 °C (12)
    Overcurrent protection
    1. ‌12 A At input (8)
    2. ‌2 A At input (7)
    Overvoltage category
    1. III (46)
    Packaging
    1. Cardboard box (1)
    Packaging size
    1. 1 (1422)
    2. 10 (425)
    3. 100 (93)
    4. 12 (2)
    5. 120 (2)
    6. 15 (1)
    7. 2 (117)
    8. 20 (1)
    9. 25 (19)
    10. 3 (1)
    11. 4 (2)
    12. 50 (13)
    13. 9 (2)
    14. [1] (1)
    Packet buffer size
    1. 0.44 Megabit (9)
    2. 1 Megabit (7)
    Pack contents
    1. 1 adapter,4 fixing screws for adapter,2 fixing screws for D-Sub connector (2)
    2. 1 adapter,4 fixing screws for adapter,4 fixing screws for D-Sub connector (1)
    3. 1 frame,4 cheese head shoulder screws (Steel, zinc plated) to fix the docking frame (4)
    4. 1 latching part with strain relief,1 latching part (1)
    5. 1 module,2 locking sleeves,2 heat shrink tubes (2)
    6. 10 pieces per frame (5)
    7. 2 adapters,4 fixing screws (1)
    8. 2 fixing screws for D-Sub connector,4 fixing screws for adapter,1 adapter (5)
    9. 2 half shells with blind plugs (4)
    10. 2 insert mounting parts (1)
    11. 2 insert mounting parts,1 carrier element (2)
    12. 2 latching parts (1)
    13. 2 metallic panel mounting parts sufficient for one insert or terminal block connector (1)
    14. 2 plastic panel mounting parts sufficient for one insert or terminal block connector (1)
    15. 2 split hood halves (2)
    16. 2-port metal housing with protection caps,Cable gland,Dummy plugs,PCB module with LSA-PLUS strips,Label,Assembly instructions (1)
    17. 20 pieces in one block (1)
    18. 20 pieces per frame (4)
    19. 2x RJ45 jack,Assembly instructions,Drilling template,Dummy plugs (1)
    20. 4 fixing screws for adapter,4 fixing screws for D-Sub connector,1 adapter (1)
    21. 4 screws are included within the delivery (3)
    22. 8 pieces per frame (2)
    23. 88 pieces in one block (1)
    24. Assembly instructions (1)
    25. Cable tie is included within the delivery (1)
    26. Connector insert (2)
    27. Connector insert,Hoods/Housings,Cable gland,Assembly instructions (5)
    28. Distributor,Fixing screw M4 with washer (1)
    29. Fixing screw M4 with washer,Strain relief clamp with 2 screws M3 (2)
    30. Ground terminal frame with M4 screws for fixing at insert (4)
    31. Hood with shielding,Cable gland,Assembly instructions (1)
    32. Hood with shielding,Splicing element,Cable gland,Assembly instructions (1)
    33. incl. 4 panel fastener (2)
    34. incl. 4 turned crimp contacts (male) for 1.5 mm², insulation body, housing and cable gland (1)
    35. incl. bulkhead mounted housing for rectangular panel cut out, flat seal and HARTING RJ Industrial® 10G RJ45 bulkhead (1)
    36. incl. housing and male insert (1)
    37. incl. housing with RJ45 connector, shielding and cable gland (1)
    38. incl. integrated seal, 2x RJ45-jack and board drillings for M3 (3)
    39. incl. lock nut (2)
    40. incl. metal housing and female insert (1)
    41. incl. seal, 2x RJ45-jack and board drillings for M2.5 (1)
    42. inkl. bulkhead mounted housing for circular panel cut out, flat seal and HARTING RJ Industrial® 10G RJ45 bulkhead (1)
    43. Pluggable screw contact for power supply,Assembly instructions (15)
    44. Two-piece adapter,2 fixing screws for D-Sub connector,2 fixing screws for adapter (1)
    45. with 3 turned male contacts, insulation body, hood and cable gland (1)
    46. with 4 turned female contacts, insulation body, hood and integrated seal (3)
    47. With heat shrink tube (4)
    48. With seal screw (8)
    49. With spacing washer (4)
    Permissible voltage
    1. 12 ... 60 V DC (1)
    2. 9 ... 60 V DC (15)
    PE contact
    1. Yes (274)
    Pinout
    1. + / - / - / + (1)
    2. + / - / FE (15)
    Pollution degree (signal)
    1. 3 (27)
    Pressing screw for cable gland
    1. M3 (5)
    2. M4 (3)
    3. M5 (3)
    Price
    1. £0.0000 - £999.9900 (2214)
    2. £1,000.0000 - £1,999.9900 (3)
    3. £4,000.0000 and above (1)
    Rated current
    1. 10 A (7)
    2. 16 A (4)
    3. 20 A (2)
    4. 4 A (1)
    5. 6.5 A (4)
    6. Rated current measured at 20 °C, see derating curve for details (1)
    7. ‌ 1 A (6)
    8. ‌ 1.5 A (5)
    9. ‌ 1.75 A (3)
    10. ‌ 10 A (120)
    11. ‌ 100 A (12)
    12. ‌ 12 A (4)
    13. ‌ 16 A (173)
    14. ‌ 20 A (2)
    15. ‌ 200 A (10)
    16. ‌ 25 A (2)
    17. ‌ 250 A (1)
    18. ‌ 35 A (4)
    19. ‌ 350 A (4)
    20. ‌ 4 A (36)
    21. ‌ 40 A (40)
    22. ‌ 5 A (6)
    23. ‌ 6 A (6)
    24. ‌ 6.5 A (1)
    25. ‌ 63 A (2)
    26. ‌ 7.5 A (1)
    27. ‌ 70 A (8)
    28. ‌ 80 A (6)
    Rated current acc. to UL (signal)
    1. 10 A (8)
    2. 16 A (10)
    Rated current (signal)
    1. 10 A (17)
    2. 16 A (10)
    Rated impulse voltage (signal)
    1. 2.5 kV (4)
    2. 4 kV (13)
    3. 6 kV (8)
    4. 8 kV (2)
    Rated voltage acc. to UL (signal)
    1. 230 V (2)
    2. 250 V (5)
    3. 300 V (2)
    4. 600 V (14)
    Rated voltage conductor-earth
    1. 1,150 V (4)
    2. 2,900 V (2)
    3. 230 V (33)
    4. 400 V (14)
    Rated voltage (signal)
    1. 160 V (4)
    2. 250 V (11)
    3. 400 V (8)
    4. 830 V (2)
    REACH ANNEX XIV substances
    1. No (2097)
    2. [No] (1)
    REACH Annex XVII substances
    1. No (2097)
    2. [No] (1)
    REACH SVHC substances
    1. Lead (713)
    2. No (1383)
    3. Yes (1)
    4. [Yes] (1)
    Reduced size
    1. M16 (1)
    2. M20 (1)
    3. M25 (1)
    4. Pg 11 (1)
    5. Pg 13.5 (3)
    6. Pg 16 (3)
    7. Pg 21 (2)
    8. Pg 29 (1)
    9. Pg 36 (1)
    10. Pg 42 (1)
    11. Pg 7 (1)
    12. Pg 9 (1)
    Relative humidity
    1. 0 ... 95 % Non-condensing (operation),0 ... 95 % Non-condensing (storage/transport) (15)
    2. 10 ... 95 % Non-condensing (operation),10 ... 95 % Non-condensing (storage/transport) (1)
    Retention force
    1. ‌200 N Without guiding,‌300 N With guiding (2)
    2. ≥250 N in the sheet-metal cut out (1)
    3. ≥300 N in locked position (4)
    4. ≥300 N On rail (tension),≥1,000 N On rail (pressure) (1)
    5. ≥450 N On rail (4)
    Reverse polarity proof
    1. Yes (16)
    RoHS
    1. compliant (1383)
    2. compliant with exemption (713)
    3. not compliant (1)
    4. [compliant with exemption] (1)
    RoHS conformity
    1. Please contact our customer service (913)
    2. Yes (1123)
    RoHS exemptions
    1. 6(b) / 6(b)-II: Lead as an alloying element in aluminium containing up to 0,4 % lead by weight / Lead as an alloying element in aluminium for machining purposes with a lead content up to 0,4 % by weight (7)
    2. 6(c): Copper alloy containing up to 4 % lead by weight (623)
    Roughness of the surface
    1. ≤ 0.8 µm (6)
    2. ≤ 1.12 µm (10)
    Rated current acc. to CSA (signal)
    1. 10 A (8)
    2. 15 A (2)
    3. 16 A (8)
    Rated voltage acc. to CSA (signal)
    1. 230 V (2)
    2. 250 V (2)
    3. 300 V (10)
    4. 600 V (6)
    Rated voltage conductor-conductor (signal)
    1. 400 V (2)
    Rated voltage conductor-earth (signal)
    1. 230 V (2)
    Series
    1. har-port (21)
    2. Circular connectors 7/8" (5)
    3. Circular connectors M12 (44)
    4. Circular connectors M8 (4)
    5. D-Sub (3)
    6. DIN 41612 (1)
    7. DIN 41626 (8)
    8. Ha-VIS eCon 2000 (6)
    9. Ha-VIS eCon 3000 (9)
    10. Ha-VIS eCon 7000 (2)
    11. Ha-VIS eCon 7100 (1)
    12. Han A® (25)
    13. Han D® (56)
    14. Han D® AV (11)
    15. Han D® AV Distributor,Han D® AV (1)
    16. Han D® HMC (4)
    17. Han D®,Han DD®,Han® DDD (1)
    18. Han DD® (12)
    19. Han DD® HMC (2)
    20. Han E® (64)
    21. Han E® AV (27)
    22. Han E® AV,Han® ES AV (1)
    23. Han E® High Temp (5)
    24. Han E® HMC (9)
    25. Han E®,Han® EE,Han DD®,Han-Snap® (4)
    26. Han E®,Han® EE,Han® EEE (1)
    27. Han Hv E® (14)
    28. Han P® (5)
    29. Han® 3A RJ45 (Variant 5) (1)
    30. Han® B (2)
    31. Han® High Temp (2)
    32. Han-Yellock® (10)
    33. Han-Brid® (1)
    34. Han-Brid® (20)
    35. Han-Com® (24)
    36. Han-Eco® Modular (2)
    37. Han-Max® (1)
    38. Han-Modular® (119)
    39. Han-Port® (1)
    40. Han-Quintax® (2)
    41. Han-Quintax® High Density (2)
    42. Han-Snap® (12)
    43. Han® 1A (28)
    44. Han® C (10)
    45. Han® D Coax (2)
    46. Han® E Coax (2)
    47. Han® EE (12)
    48. Han® EEE (4)
    49. Han® ES (10)
    50. Han® ES AV (10)
    51. Han® ESS (6)
    52. Han® F+B (15)
    53. Han® GND (2)
    54. Han® HC Modular (5)
    55. Han® HsB (4)
    56. Han® Hv ES (6)
    57. Han® PushPull (V14) (6)
    58. Han® Q (31)
    59. Han® Thermocouple (5)
    60. HARTING PushPull (V4) (12)
    61. HARTING PushPull (Variant 4) (1)
    62. HARTING RJ Industrial® (10)
    63. LC duplex (1)
    64. M12 (1)
    65. R 15 (5)
    66. R 23 (12)
    67. RJ45 (57)
    68. RJ45 Hybrid (8)
    69. Staf® (12)
    70. TC 100 (9)
    71. TC 200 (3)
    72. TC 250 (1)
    73. TC 70 (6)
    74. USB (1)
    75. [LC duplex] (1)
    Series of hoods/housings
    1. Han A® (145)
    2. Han Hv E® (14)
    3. Han-Yellock® (13)
    4. Han-Compact® (32)
    5. Han-Drive® (4)
    6. Han-Eco® (3)
    7. Han-Eco® Modular (26)
    8. Han-INOX® (8)
    9. Han-INOX®,Han® High Temp (1)
    10. Han-Modular® Compact (7)
    11. Han-Modular® ECO (4)
    12. Han-Modular® Twin (5)
    13. Han-Port® (20)
    14. Han-Power® S (4)
    15. Han-Power® T (2)
    16. Han-Snap® (5)
    17. Han® 3 A RJ45 (1)
    18. Han® B (471)
    19. Han® CGM-M (14)
    20. Han® CGM-P (9)
    21. Han® Easy Hood (4)
    22. Han® EMC (43)
    23. Han® EMC/B (12)
    24. Han® EMC/B,Han® High Temp (25)
    25. Han® Ex (1)
    26. Han® F+B (4)
    27. Han® HMC (8)
    28. Han® HPR (70)
    29. Han® M (70)
    30. R 15 (9)
    Shielding diameter
    1. 10.5 ... 14.5 mm (1)
    2. 15 ... 20 mm (3)
    3. 18 ... 25.5 mm (1)
    4. 2.5 ... 6.5 mm (3)
    5. 24 ... 31 mm (1)
    6. 3.5 ... 8 mm (1)
    7. 3.5 ... 8.5 mm (3)
    8. 4.5 ... 8 mm (1)
    9. 4.8 ... 8 mm (2)
    10. 6 ... 11 mm (1)
    11. 6.5 ... 10.5 mm (3)
    12. 8 ... 13.5 mm (1)
    13. 9 ... 13 mm (2)
    14. 9 ... 14.5 mm (1)
    15. 9.5 ... 13.5 mm (1)
    Shock resistance
    1. 30 g / 11 ms, 3 shocks / axis and direction (1)
    Signal contact
    1. No (16)
    Signal run time @ 20 °C
    1. ≤ 4.85 ns/m (3)
    2. ≤ 5.13 ns/m (2)
    3. ≤ 5.3 ns/m (14)
    Specifications
    1. DIN 41652 (1)
    2. EN 45545-2 (2)
    3. EN 45545-2 R22: HL1, HL2, HL3,EN 45545-2 R23: HL1, HL2, HL3 (3)
    4. EN 45545-2 R22: HL1, HL2, HL3,EN 45545-2 R23: HL1, HL2, HL3,EN 45545-2 R24: HL1, HL2, HL3,IEC 61373 Category 1 Class B (5)
    5. EN 45545-2 R22: HL1, HL2, HL3,EN 45545-2 R23: HL1, HL2, HL3,EN 45545-2 R24: HL1, HL2, HL3,IEC 61373 Category 1 Class B,EN 60664-1,IEC 61984 (14)
    6. EN 45545-2 R22: HL1, HL2, HL3,EN 45545-2 R23: HL1, HL2, HL3,EN 45545-2 R24: HL1, HL2, HL3,IEC 61373,EN 60664-1,IEC 61984 (2)
    7. EN 45545-2 R26: HL1, HL2, HL3 (5)
    8. EN 45545-2,NFPA 130,UN/ECE-R 118 (2)
    9. EN 50525-2-51,IEC 60228 (1)
    10. EN 60664-1,IEC 60352-4 (3)
    11. EN 60664-1,IEC 61984 (508)
    12. EN 60664-1,IEC 61984,EN 175301-801 (24)
    13. EN 60664-1,IEC 61984,EN 50124-1 (1)
    14. EN 60664-1,IEC 61984,EN 50124-1,IEC 60352-4 (2)
    15. EN 60664-1,IEC 61984,IEC 60603-7,EN 45545-2 R22: HL1, HL2, HL3,EN 45545-2 R23: HL1, HL2, HL3 (1)
    16. EN 60664-1,IEC 61984,IEC 60603-7,EN 45545-2 R26: HL1, HL2, HL3 (1)
    17. IEC 11801,IEC 24702,IEC 61935-2 (10)
    18. IEC 11801,IEC 61156-6,IEC 24702 (12)
    19. IEC 60068-2-6 Vibration (sinusoidal),IEC 60068-2-27 Shock (14)
    20. IEC 60603-2 (1)
    21. IEC 60603-7 Mating face,IEC 11801,EN 50173-1,EN 45545-2 R26: HL1, HL2, HL3 (2)
    22. IEC 61076-2-101 (37)
    23. IEC 61076-2-104 (4)
    24. IEC 61076-3-106 Variant 4 (V4) (4)
    25. IEC 61076-3-106 Variant 4 (V4),EN 45545-2 R22: HL1, HL2, HL3,EN 45545-2 R23: HL1, HL2, HL3 (6)
    26. IEC 61076-3-106 Variant 4 (V4),EN 45545-2 R26: HL1, HL2, HL3 (2)
    27. IEC 61076-3-117 Variant 14 (V14),IEC 60603-7 Mating face,EN 45545-2 R22: HL1, HL2, HL3,EN 45545-2 R23: HL1, HL2, HL3 (3)
    28. IEC 61076-3-117,EN 45545-2 R22: HL1, HL2, HL3,EN 45545-2 R23: HL1, HL2, HL3 (1)
    29. IEC 61076-3-118 (5)
    30. IEC 61984 (28)
    31. IEC 61984,EN 45545-2 R22: HL1, HL2, HL3,EN 45545-2 R23: HL1, HL2, HL3,EN 45545-2 R24: HL1, HL2, HL3 (25)
    32. IEC 61984,EN 60664-1 (5)
    33. IEC PAS 61076-3-126 (1)
    Starting current
    1. <1.6 A @ 24 V DC,<3.2 A @ 48 V DC (9)
    2. <2.8 A @ 24 V DC,<5.6 A @ 48 V DC (4)
    3. <3.2 A @ 24 V DC,<6.4 A @ 48 V DC,<7.2 A @ 54 V DC (2)
    Storage temperature
    1. -25 ... +60 °C (4)
    2. -40 ... +85 °C (16)
    Style screwing
    1. Style A (3)
    2. Style B (2)
    3. Style C (2)
    4. Style D (6)
    Supply circuit
    1. SELV (Circuit Breaker 10 A) (14)
    Supply voltage
    1. 125 V AC (1)
    2. 250 V AC (4)
    Surface (accessories)
    1. Nickel plated (14)
    2. Nickel plated,Copper-plated (1)
    3. Zinc plated (2)
    Surface (contacts)
    1. Gold plated (71)
    2. HMC gold plated (9)
    3. Nickel plated (1)
    4. Noble metal Mating side,Sn over Ni Termination side (1)
    5. Silver plated (291)
    6. Sn over Ni Termination side,Au over Ni Mating side (1)
    7. Tin plated (1)
    Surface (hood/housing)
    1. Chromated (8)
    2. Nickel plated (15)
    3. Passivated (2)
    4. Powder-coated (684)
    5. Smoothed surface (4)
    6. Uncoated (86)
    7. Zinc passivation (3)
    8. [Powder-coated] (1)
    Surface (locking)
    1. Zinc plated (24)
    Surge protection
    1. Yes (16)
    Switching technology
    1. Store and Forward (16)
    Test voltage Ur.m.s.
    1. 1 kV (2)
    Tightening torque (screw locking)
    1. ‌ 2 Nm (3)
    2. ‌ 4 Nm (53)
    Thickness of the panel
    1. 2 ... 5 mm (1)
    2. 2 ... ‌5 mm (3)
    3. 2.1 ... 4.5 mm (2)
    4. 2.5 ... ‌4.5 mm (2)
    Tightening torque
    1. 0.12 Nm (1)
    2. 0.25 Nm (16)
    3. 0.3 Nm Screws M3 (2)
    4. 0.4 Nm (4)
    5. 0.5 Nm (74)
    6. 0.5 Nm Fixing screws M3 (1)
    7. 0.5 Nm Fixing screws M3,1.5 Nm Screws M4 (1)
    8. 0.6 Nm (21)
    9. 0.8 Nm (14)
    10. 1 Nm Fixing screws M3 (3)
    11. 1 Nm PE screw (4)
    12. 1.2 Nm @ 1.5 mm²,2 Nm @ 2.5 mm²,3 Nm @ 4 mm²,3 Nm @ 6 mm²,3 Nm @ 10 mm²,3 Nm @ 16 mm² (2)
    13. 1.2 Nm @ 1.5 mm²,2 Nm @ 2.5 mm²,3 Nm @ 4 mm²,3 Nm @ 6 mm²,3 Nm @ 10 mm²,3 Nm @ 16 mm²,0.5 Nm Signal (4)
    14. 1.5 Nm (2)
    15. 1.5 Nm @ 2.5 mm²,1.5 Nm @ 4 mm²,2 Nm @ 6 mm² (4)
    16. 1.5 Nm @ 2.5 mm²,1.5 Nm @ 4 mm²,2 Nm @ 6 mm²,0.5 Nm Signal (2)
    17. 1.8 Nm (8)
    18. 14 Nm @ 95 mm²,16 Nm @ 120 mm² (2)
    19. 15 Nm Fitting,4 Nm Cap nut (1)
    20. 2 Nm @ 6 mm²,2 Nm @ 10 mm² (4)
    21. 2 Nm @ 6 mm²,3 Nm @ 10 mm²,4 Nm @ 14 mm²,4 Nm @ 16 mm² (3)
    22. 2 Nm @ 6 mm²,3 Nm @ 10 mm²,4 Nm @ 16 mm² (2)
    23. 2 Nm Lock nut (5)
    24. 3 Nm Cable gland (1)
    25. 4 Nm @ 14 mm²,4 Nm @ 16 mm²,4 Nm @ 22 mm² (3)
    26. 5 Nm (1)
    27. 6 ... 7 Nm (2)
    28. 6 ... 8 Nm (2)
    29. 6 Nm @ 10 mm²,6 Nm @ 16 mm²,7 Nm @ 25 mm² (2)
    30. 6 Nm @ 16 mm²,7 Nm @ 25 mm²,8 Nm @ 35 mm²,0.5 Nm Signal (1)
    31. 8 Nm (4)
    32. 8 Nm @ 35 mm²,10 Nm @ 50 mm²,12 Nm @ 70 mm² (2)
    33. 8 Nm @ 35 mm²,9 Nm @ 50 mm²,10 Nm @ 70 mm² (2)
    34. 8 Nm @ 35 mm²,9 Nm @ 50 mm²,10 Nm @ 70 mm²,0.5 Nm Signal contacts,6 Nm PE contact (2)
    35. 9 ... 10 Nm (4)
    36. ‌0.5 Nm (1)
    37. ‌0.6 Nm (6)
    38. ‌2 Nm Lock nut (5)
    39. ‌3 Nm (1)
    40. ‌6 Nm @ 10 mm²,‌6 Nm @ 16 mm²,‌7 Nm @ 25 mm² (2)
    41. ‌6 Nm @ 16 mm²,‌7 Nm @ 25 mm²,‌8 Nm @ 35 mm²,‌0.5 Nm Signal (1)
    42. ≤10 Nm (depending on the cable and the seal insert used) (18)
    43. ≤12 Nm (depending on the cable and the seal insert used) (3)
    44. ≤15 Nm (depending on the cable and the seal insert used) (10)
    45. ≤20 Nm (depending on the cable and the seal insert used) (4)
    46. ≤24 Nm (depending on the cable and the seal insert used) (1)
    47. ≤30 Nm (depending on the cable and the seal insert used) (2)
    48. ≤4.5 Nm (depending on the cable and the seal insert used) (3)
    49. ≤5 Nm (depending on the cable and the seal insert used) (2)
    50. ≤6 Nm (depending on the cable and the seal insert used) (5)
    51. ≤6.5 Nm (depending on the cable and the seal insert used) (2)
    Total number of ports
    1. 10 (2)
    2. 4 (1)
    3. 5 (5)
    4. 6 (5)
    5. 7 (1)
    6. 8 (2)
    Transmission length
    1. 100 m (7)
    Transmission physics
    1. Twisted Pair Cat. 5 (7)
    Transmission standard
    1. 10BASE-Te,100BASE-TX EEE (5)
    2. 10BASE-Te,100BASE-TX EEE,1000BASE-T EEE (2)
    Tube inner diameter
    1. 1.6 mm (3)
    2. 3 mm (3)
    3. 4 mm (3)
    4. 6 mm (3)
    Type
    1. High construction (331)
    2. High construction,Low construction (35)
    3. Low construction (254)
    4. Low construction,High construction (5)
    5. simple (37)
    Type of accessory
    1. Adapter (5)
    2. Adapter frames (4)
    3. Adapter plate (10)
    4. Bearing pedestal (1)
    5. Blind plate (2)
    6. Bush (1)
    7. Cable entry seal (11)
    8. Cable gland (116)
    9. Cable seal (3)
    10. Cable shoe (2)
    11. Cap (2)
    12. Clamp (1)
    13. Coding (8)
    14. Coding element (11)
    15. Coding pin (2)
    16. Connecting hardware, panels and outlets (1)
    17. Docking frame (7)
    18. Dummy plugs (15)
    19. Dust protection cover (5)
    20. Earthing cable (1)
    21. Fixing (1)
    22. Fixing element (2)
    23. Fixing plate (1)
    24. Fixing screws (4)
    25. Flange gasket (15)
    26. Frame (3)
    27. Grip frame (2)
    28. Grommet (3)
    29. Hexagonal adapter (2)
    30. Hinged frame (8)
    31. Holder for ribbon cable entry (1)
    32. Identification strip (4)
    33. Increaser (6)
    34. Insert mounting (5)
    35. Knurled screw (1)
    36. L-seal (1)
    37. Label holder (1)
    38. Latching parts (2)
    39. Locking element (1)
    40. Locking levers (12)
    41. Locking screw (1)
    42. M12 female-RJ45 panel feed through (2)
    43. M12 male-RJ45 adapter (1)
    44. M12-male/female panel feed through (1)
    45. Mounting frames (5)
    46. O-ring rubber seal (1)
    47. Outlet (1)
    48. Panel mounting parts (2)
    49. PCB adapter (2)
    50. PE bracket (1)
    51. PE Multiple ground connection (1)
    52. PE screw (3)
    53. Profile gasket (6)
    54. Protection cover (12)
    55. Reduced size (11)
    56. Reduction seal insert (2)
    57. Ring nut (1)
    58. Screw adapter (1)
    59. Seal (13)
    60. Seal cover (1)
    61. Set of seals for ribbon cable entry (3)
    62. Shielded frame (1)
    63. Shielding frame (7)
    64. Single wire seal (4)
    65. Strain relief (1)
    66. Strain relief clamp (2)
    67. Thread adapter (2)
    68. Wall mounting kit (2)
    Type of cable
    1. Copper cable (round) (60)
    2. Hybrid cable (copper/copper) (2)
    Type of contact
    1. Axial screw contact (2)
    2. Coaxial contact (6)
    3. Crimp contact (110)
    4. FO contact (4)
    5. LC contact (1)
    6. PCB contact (6)
    7. PE contact chamber (1)
    8. Pneumatic contact (12)
    9. SC contact (2)
    10. [LC contact] (1)
    Type of hood/housing
    1. Adapter (3)
    2. Bulkhead mounted housing (110)
    3. Cable adapter (1)
    4. Cable to cable housing (64)
    5. Carrier hood (4)
    6. Cover (1)
    7. Flange housing (1)
    8. Hood (441)
    9. Housing for motor application (4)
    10. Panel feed through housing (4)
    11. Protection cover (80)
    12. Screw mounted housing (7)
    13. Shell (3)
    14. Shell housing (4)
    15. Surface mounted housing (224)
    16. [Hood] (1)
    Type rating acc. to UL 50 / UL 50E
    1. 12 (42)
    2. 12,4 (54)
    3. 12,4,4X (440)
    4. 4,12 (26)
    5. 4,4X,12 (261)
    UL / CSA
    1. UL 1059 XCFR2.E314677,CSA-C22.2 No. 158-10 XCFR8.E314677 (1)
    2. UL 1863 DUXR.E470046,CSA-C22.2 No. 182.4, No. 233-09 DUXR7.E470046 (3)
    3. UL 1863 DUXR2.E470046,CSA-C22.2 No. 182.4, No. 233-09 DUXR8.E470046 (6)
    4. UL 1977 DUXR2.E254191,CSA-C22.2 No. 182.4, No. 233-09 DUXR8.E254191 (2)
    5. UL 1977 ECBT2.E102079 (2)
    6. UL 1977 ECBT2.E102079,CSA-C22.2 No. 182.3 ECBT8.E102079 (67)
    7. UL 1977 ECBT2.E235076 (133)
    8. UL 1977 ECBT2.E235076,CSA-C22.2 No. 182.3 ECBT8.E235076 (807)
    9. UL 1977 ECBT2.E235076,CSA-C22.2 No. 182.3 ECBT8.E235076,UL 2237 PVVA2.E318390,CSA-C22.2 No. 182.3 PVVA8.E318390 (25)
    10. UL 1977 ECBT2.E235076,UL 2237 PVVA2.E318390,CSA-C22.2 No. 182.3 ECBT8.E235076,CSA-C22.2 No. 182.3 PVVA8.E318390 (10)
    11. UL 1977 ECBT2.E235076,UL 2237 PVVA2.E318390,CSA-C22.2 No. 182.3 PVVA8.E318390 (91)
    12. UL 2237 PVVA.E318390,CSA-C22.2 No. 182.3 PVVA7.E318390 (2)
    13. UL 2238 CYJV2.E302521,CSA-C22.2 No. 182.3 CYJV8.E302521 (3)
    14. UL 508 NRAQ.E253944,CSA-C22.2 No. 142 NRAQ7.E253944 (15)
    15. UL 508 NRAQ2.E253944,CSA-C22.2 No. 142 NRAQ8.E253944 (9)
    16. UL 514B QCRV.E479780,CSA-C22.2 No. 18.3 QCRV7.E479780 (23)
    Un-/locking temperature
    1. -10 ... +85 °C (13)
    Version
    1. Angled entry (3)
    2. Side entry (417)
    3. Top entry (295)
    4. Top/side entry (5)
    5. Without cable entry (9)
    Width across corners
    1. 22.9 mm (2)
    2. 23 mm (1)
    3. 24.4 mm (7)
    4. 25.4 mm (1)
    5. 25.9 mm (1)
    6. 26.4 mm (2)
    7. 26.5 mm (1)
    8. 29.8 mm (1)
    9. 31.2 mm (2)
    10. 31.5 mm (1)
    11. 32.3 mm (1)
    12. 33 mm (1)
    13. 33.5 mm (5)
    14. 36 mm (1)
    15. 36.5 mm (1)
    16. 37 mm (1)
    17. 38 mm (1)
    18. 38.5 mm (2)
    19. 40.4 mm (1)
    20. 44 mm (3)
    21. 46 mm (1)
    22. 46.8 mm (2)
    23. 47.3 mm (1)
    24. 50 mm (1)
    25. 50.8 mm (1)
    26. 55 mm (3)
    27. 58.8 mm (2)
    28. 60 mm (2)
    29. 76 mm (1)
    Wire cross section
    1. 0.25 mm² (1)
    2. 0.5 mm2 (12)
    3. 0.50 mm² (2)
    4. 0.75 mm² (2)
    5. 0.75 mm2 (10)
    6. 1 mm2 (10)
    7. 1.00 mm² (2)
    8. 1.5 mm² (1)
    9. 1.5 mm2 (19)
    10. 10 mm2 (5)
    11. 16 mm2 (5)
    12. 2.5 mm2 (23)
    13. 2.50 mm² (4)
    14. 25 mm2 (5)
    15. 3 mm2 (2)
    16. 35 mm2 (3)
    17. 4 mm2 (7)
    18. 50 mm2 (2)
    19. 6 mm2 (2)
    20. 70 mm2 (1)
    21. AWG 16-14; 1.50 mm² (5)
    22. AWG 16; 1.5 mm² (1)
    23. AWG 18-16; 0.75-1.50 mm² (2)
    24. AWG 22 (8)
    25. AWG 22-18; 0.34-0.75 mm² (7)
    26. AWG 22-20; 0.34-0.50 mm² (2)
    27. AWG 22-24 stranded; AWG 22-23 solid (4)
    28. AWG 24-22; 0.24-0.34 mm² (2)
    29. AWG 24-26 stranded (1)
    30. AWG 24-28 stranded (5)
    31. AWG 24/7-20; 0.25-0.50 mm² (2)
    32. AWG 26-22; 0.14-0.34 mm² (10)
    33. AWG 26-24; 0.14-0.22 mm² (1)
    34. AWG 27-22 stranded; AWG 24-22 solid (5)
    35. AWG 28-24; 0.09 - 0.25 mm² (1)
    36. Data: AWG 22-24 stranded; AWG 22-23 solid / Power: 1.5 mm² (2)
    37. Data: AWG 27 - 22 / Power: 1.5 mm² (1)
    Wire gauge AWG
    1. AWG 10 (2)
    2. AWG 12 (8)
    3. AWG 14 (22)
    4. AWG 16 (19)
    5. AWG 18 (20)
    6. AWG 2 (2)
    7. AWG 20 (12)
    8. AWG 4 (6)
    9. AWG 6 (2)
    10. AWG 8 (5)
    Wire outer diameter
    1. 0.7 ... ‌1.6 mm (1)
    2. ‌1.05 mm (4)
    3. ‌1.6 mm (5)
    4. ≤ 1.6 mm (12)
    5. ≤ 2 mm (5)
    6. ≤ 2.3 mm (11)
    7. ≤ 2.6 mm (9)
    8. ≤ 2.8 mm (2)
    9. ≤1.5 mm (1)
    10. ≤1.6 mm (3)
    11. ≤11.4 mm (4)
    12. ≤18 mm (1)
    13. ≤19.5 mm (4)
    14. ≤5 mm (6)
    15. ≤6.1 mm (2)
    16. ≤8.9 mm (2)
    With wire protection
    1. Yes (32)
    Wrench size (knurled screw / knurled nut)
    1. 13 (4)
    2. 17 (23)
    3. 22 (2)
    4. 9 (4)

    Industrial

    Grid List

    Set Descending Direction

    1-12 of 2218

    Page:
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5

    Grid List

    Set Descending Direction

    1-12 of 2218

    Page:
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5

    Quick Links

    Stockists of

    BSI Cert. No. FS35209
    Mastercard payments supported by Worldpay Visa Electron payments supported by Worldpay Visa Credit and Debit payments supported by Worldpay Maestro payments supported by Worldpay JCB payments supported by Worldpay Worldpay Payments Processing
    1988 - 2020  —  32 years experience.
    © Co-Tron Components Ltd. Registered in England. Company No 02472245. VAT No 565 4944 06.