Filter

Connection type

1. Cable to cable (1)
2. Cable to cable,PCB to cable (9)
3. Cable to cable,PCB to cable,Motherboard to daughtercard (2)
4. Extender card,Cable to cable,PCB to cable,Motherboard to daughtercard (3)
5. Extender card,Motherboard to daughtercard (5)
6. Extender card,PCB to cable,Motherboard to daughtercard (19)
7. Mezzanine,Cable to cable,PCB to cable,Motherboard to daughtercard (2)
8. Mezzanine,Motherboard to daughtercard (15)
9. Mezzanine,PCB to cable,Motherboard to daughtercard (17)
10. Motherboard to daughtercard (14)
11. PCB to cable (106)
12. PCB to cable,Motherboard to daughtercard (3)

Strain relief

1. An additional InduCom cable clamp or a crimp flange - ferrule combination is available dependant on the use of the cable. (1)
2. With cable clamps (5)
3. With cable clamps or cable grommets (1)
4. With cable tie (2)
5. With strain relief clamp (16)

2 parts

1. Yes (9)

Separable

1. Yes (9)

Leading contact

1. a1,a32 (2)
2. d32,d31,d1,d2 (1)
3. z32 (4)
4. z32,z4 (1)

Contact rows

1. 1 (1)
2. 10 (1)
3. 2 (104)
4. 3 (60)
5. 4 (4)
6. 5 (4)
7. 7 (10)

Contact spacing (termination side)

1. 10.16 mm (1)
2. 2 mm (12)
3. 2.54 mm (147)
4. 3.81 mm,5.08 mm (1)
5. 5.08 mm (20)
6. 5.08 mm,2.54 mm (5)

Contact spacing (mating side)

1. 1.27 mm (33)
2. 10.16 mm,6.5 mm (9)
3. 2 mm (12)
4. 2.54 mm (66)
5. 3.81 mm,5.08 mm (15)
6. 5.08 mm (14)

Insertion and withdrawal force

1. ≤ 100 N (7)
2. ≤ 102 N (1)
3. ≤ 120 N (2)
4. ≤ 128 N (6)
5. ≤ 150 N (1)
6. ≤ 160 N (3)
7. ≤ 18 N (1)
8. ≤ 192 N (3)
9. ≤ 20 N (8)
10. ≤ 28 N (2)
11. ≤ 30 N (15)
12. ≤ 32 N (8)
13. ≤ 40 N (13)
14. ≤ 42 N (1)
15. ≤ 45 N (4)
16. ≤ 48 N (2)
17. ≤ 50 N (4)
18. ≤ 52 N (7)
19. ≤ 60 N (28)
20. ≤ 68 N (8)
21. ≤ 75 N (10)
22. ≤ 78 N (2)
23. ≤ 80 N (6)
24. ≤ 85 N (4)
25. ≤ 90 N (19)

Isolation group

1. I (600 ≤ CTI) (1)
2. IIIa (175 ≤ CTI < 400) (112)

Wire outer diameter

1. 0.7 ... ‌1.5 mm (3)
2. 0.8 ... ‌2 mm (4)
3. 1.6 ... ‌2.8 mm (3)
4. ≤ 2.3 mm (1)

Surface (hood/housing)

1. Metallised (12)
2. Nickel plated,Copper-plated (1)

eCl@ss

1. 27440102 Circular connector (for field assembly) (1)
2. 27440204 Contact for industrial connectors (55)
3. 27440213 D-Sub hood (52)
4. 27440292 Connector component (accessories) (93)
5. 27440307 I/O connector (91)
6. 27440309 Cable connector for printed circuit board (33)
7. 27440402 PCB connector (163)

Type

1. simple (7)

Field of application

1. CompactPCI Positions RJ2 RJ5 (1)
2. VME Position J0 (2)

Price

1. £0.0000 - £999.9900 (570)
2. £4,000.0000 and above (1)

Tightening torque

1. 0.4 Nm cover screw,0.4 Nm Locking screw (1)
2. 0.6 Nm (1)

Type of cable

1. Copper cable (flat) (2)
2. Copper cable (round) (3)

Description of the cable

1. Twisted pair (1)

Number of cores

1. 37 (1)
2. 4 (1)
3. 60 (1)
4. 64 (2)

Color

1. Color Coded (1)
2. Grey (3)

Inner diameter

1. 10 mm (1)
2. 5 mm (1)

Outer diameter

1. ‌ 11 mm (1)
2. ‌ 6 mm (1)

Conductor resistance @ 20 °C

1. ≤ 221 Ω/km (1)
2. ≤ 225 Ω/km (2)

Signal run time @ 20 °C

1. ≤ 4.9 ns/m (1)
2. ≤ 5.2 ns/m (1)
3. ≤ 5.25 ns/m (2)

Impedance @ 100 MHz

1. ‌105 Ω (2)
2. ‌75 Ω (2)

Insulation resistance @ 20 °C

1. ≥ 100 MΩ x km (1)

Packaging

1. 1,000 contacts in a plastic bag (7)
2. 100 pcs bulk (9)
3. 2,500 contacts on reel (2)
4. 250 contacts on reel (1)
5. 500 pcs bulk (10)
6. 500 pcs reel (4)
7. Cardboard box (33)
8. Plastic bag (19)
9. Standard (74)
10. Tube (11)

Material (screw)

1. Brass, nickel plated (1)

Mounting height

1. 5.5 mm (2)

RoHS conformity

1. Please contact our customer service (15)
2. Yes (473)

Overvoltage category

1. III (1)

Type of contact

1. Coaxial contact (10)
2. Crimp contact (32)
3. Electrical contact (12)
4. Solder contact (1)

Rated current

1. 1 A (72)
2. 1.5 A (1)
3. 15 A (10)
4. 2 A (66)
5. 2.5 A (26)
6. 2.6 A (2)
7. 4 A (1)
8. 5 A (4)
9. 6 A (22)
10. 6.5 A (26)
11. 7.5 A (29)

Series

1. har-bus^® HM (30)
2. har-bus^® 64 (4)
3. har-link^® (1)
4. Circular connectors M12 (1)
5. D-Sub (149)
6. DIN 41612 (134)
7. Han-Modular® (3)
8. Miniature D har.mik® Pin and Socket (3)
9. SEK (37)
10. SEK Low-profile (17)
11. SEK Standard (37)

Contact resistance

1. <= 3 mOhm (3)
2. < 20 mΩ (2)
3. < 25 mΩ (1)
4. ≤ 1 mΩ (7)
5. ≤ 10 mΩ (89)
6. ≤ 15 mΩ (28)
7. ≤ 20 mΩ (158)
8. ≤ 20 mΩ,≤ 30 mΩ (3)
9. ≤ 25 mΩ (1)
10. ≤ 3 mΩ (1)
11. ≤ 35 mΩ (3)
12. ≤ 8 mΩ (10)

Wire cross section

1. AWG 20-16; 0.50-1.50 mm² (3)
2. AWG 24-20; 0.25-0.56 mm² (1)
3. AWG 26-20; 0.14 - 0.56 mm² (4)
4. AWG 28-20; 0.09 - 0.50 mm² (3)

European customs tariff number

1. 39239000 (3)
2. 39269097 (1)
3. 73181510 (7)
4. 73181558 (2)
5. 7318159090 (1)
6. 74153300 (1)
7. 79070000 (1)
8. 85322400 (6)
9. 85359000 (1)
10. 85365080 (6)
11. 85366910 (3)
12. 85366953 (178)
13. 85366990 (165)
14. 8536901100 (15)
15. 8538900000 (4)
16. 85389040 (33)
17. 85389099 (61)
18. 85444290 (1)
19. 85444991 (4)

Colour (accessories)

1. Black (4)
2. Grey (1)
3. RAL 1021 (colza yellow) (2)
4. RAL 1024 (ochre yellow) (2)
5. RAL 2003 (pastel orange) (2)
6. RAL 3018 (strawberry red) (2)
7. RAL 4005 (blue lilac) (2)
8. RAL 5007 (brilliant blue) (1)
9. RAL 5011 (steel blue) (2)
10. RAL 6011 (reseda green) (2)
11. RAL 7015 (slate grey) (2)
12. RAL 8011 (nut brown) (2)

Material (accessories)

1. Corrosion resistant steel (4)
2. Fibre-glass reinforced,Thermoplastic (8)
3. Metal (8)
4. Plastic, metallised (2)
5. Thermoplastic (44)
6. Thermoplastic resin (PBT) (1)

Material, contact

1. copper alloy (12)

Surface (contacts)

1. 0.2 µm Au / 5 µm Sn (mating side / termination side) (5)
2. 0.76 µm Au / 5 µm Sn (mating side / termination side) (2)
3. 1.3 µm Au / 1.3 µm Au (mating side / termination side) (1)
4. Au over Ni Mating side (1)
5. Au over Ni Mating side,Nickel plated Termination side (4)
6. Au over Pd/Ni over Ni Mating side,Nickel plated Termination side (7)
7. Gold plated (9)
8. gold plated contacts (3)
9. Noble metal (94)
10. Silver plated (10)

Category

1. Accessories (93)
2. Cable (5)
3. Connector (288)
4. Contacts (55)
5. Hoods/Housings (52)

Series of hoods/housings

1. D-Sub (50)
2. D-Sub InduCom (1)
3. D-Sub, IP67 (1)
4. DIN 41612 (8)
5. Han^® 3 A RJ45 (1)

Type of hood/housing

1. Shell housing (52)

Description of the contact

1. Angled (53)
2. Stamped (14)
3. Stamped,Angled (8)
4. Stamped,Straight (29)
5. Straight (117)
6. Turned (8)
7. Turned,Angled (4)
8. Turned,for cables RG 174 U, 188 AU, 316 U,Straight (2)
9. Turned,for cables RG 179 BU, 187 AU,Straight (3)
10. Turned,for cables RG 58 CU, 141 AU,Straight (1)
11. Turned,for cables RG 59,Straight (2)
12. Turned,Straight (36)

Contacts for

1. DIN 41612 Type C,DIN 41612 Type B,DIN 41612 Type 2C,DIN 41612 Type 3C (2)
2. DIN 41612 Type M (5)
3. DIN 41612 Type M-flat (1)
4. DIN 41612 Type MH 24+7,DIN 41612 Type E,DIN 41612 Type F,DIN 41612 Type D,DIN 41612 Type F9,DIN 41612 Type 2F (8)

Type of accessory

1. Cable clamp (2)
2. Code comb (2)
3. Coding element (19)
4. Coding pin (6)
5. Coding pin set (1)
6. Crimp ferrule (1)
7. Crimp flange (1)
8. Female screw lock (4)
9. Fixed latch (1)
10. Fixing bracket (1)
11. Fixing brackets B (4)
12. Fixing brackets R (2)
13. Frame (3)
14. Front seal rubber (3)
15. Hex extender (1)
16. Insert for shell housing (5)
17. Junction element O (1)
18. Knurled screw (3)
19. Locking latch (2)
20. Locking lever (6)
21. Open hood (1)
22. Polarisation key (1)
23. Protection cover (3)
24. Screw (2)
25. Screw locking (1)
26. Shell housing (8)
27. Slide locking device (2)
28. Strain relief clamp (7)

Description of the accessory

1. 15 mm (4)
2. 20 mm (4)
3. 2x Ø11,Suitable for shell housing D 20/2 (1)
4. D-Sub 1 ... 4 (3)
5. for 4 different codings (1)
6. for female connectors (9)
7. for female connectors,Antistatic (1)
8. for female connectors,for CPCI, 3.3 V (1)
9. for inverse male connectors on pcb’s,R 32 (1)
10. for male connectors (8)
11. for male connectors,Antistatic (2)
12. for male connectors,for CPCI, 3.3 V (1)
13. for male connectors,for CPCI, 5.0 V (1)
14. for male connectors,Left,Multiple fixing (2)
15. for male connectors,Single fixing,for 19" racks according to DIN EN 60297,Left,Without nut (1)
16. for male connectors,Single fixing,for 19" racks according to DIN EN 60297,Without nut,Right (1)
17. for metallised hoods,Thread 4-40 UNC (1)
18. for shell housing B,Right (1)
19. for shell housing C,2 x Ø6.5 (1)
20. for shell housing C,Right (1)
21. for shell housing,Suitable for shell housing D 20/2 and D 20/4 metallised (1)
22. for type F (1)
23. for types B, 2B, 3B, C, 2C, 3C, M, M-flat, Q, 2Q, R, R (HE 11), 2R, har-bus^® 64 (1)
24. for types B, C, D and E (1)
25. for types D, E, F and interface connectors I (1)
26. for types D, E, F, FM, 2F, MH (1)
27. for types F, H and MH,Locking lever for U- and I-element only latchable (1)
28. for types H, MH 24 + 7 (1)
29. for use without Hoods/Housings (1)
30. Left,for shell housing B (1)
31. Left,for shell housing C (1)
32. Long (1)
33. M2.5 x 20,for shell housing B,For fixing of shell housing (1)
34. R 1,for inverse male connectors on pcb’s (1)
35. Suitable for shell housing D 20/2 and D 20/4 (2)
36. Suitable for shell housing D 20/2 metallised,for 55 mm height (1)
37. Suitable for shell housing D 20/2,for 55 mm height (1)
38. Suitable for shell housing D 20/2,for 60 mm height (1)
39. Thread 4-40 UNC (1)
40. Thread 4-40 UNC,Grey head / steel, nickel plated (1)
41. Thread 4-40 UNC,With inside thread (1)
42. Thread 4-40 UNC,With spacing washer (1)
43. Thread UNC/UNC,With nut,Total length 13 mm (1)
44. Type F (1)
45. With 2 contact sockets and ground termination (2)
46. With nut,for shell housing C,M2.5 x 16,For fixing of shell housing (1)
47. With nut,Thread UNC/M3,Total length 13 mm (1)
48. Without contact elements (1)
49. Without nut,Total length 11 mm,Thread UNC/M3 (1)

Identification

1. har-bus^® 64,Type E (1)
2. Filter (8)
3. High Density (9)
4. IP67 (2)
5. Mixed (27)
6. Standard (82)
7. Type 2B (5)
8. Type 2C (6)
9. Type 2Q (1)
10. Type 2R (2)
11. Type A (2)
12. Type AB19 (3)
13. Type AB22 (2)
14. Type B (9)
15. Type C (28)
16. Type C extended (1)
17. Type C,Type D (1)
18. Type D (7)
19. Type DE (1)
20. Type E (6)
21. Type F (11)
22. Type F,Type H,Type MH (6)
23. Type H15 (8)
24. Type H16 (1)
25. Type H3 (1)
26. Type M (4)
27. Type M-flat (1)
28. Type MH 24+7 (4)
29. Type Q (4)
30. Type R (5)

Accessory Type

1. Cable clamp (2)
2. Crimp ferrule (1)
3. Crimp flange (1)

Element

1. Cable connector (1)
2. Connector (90)
3. DIP connector (1)
4. Female connector (82)
5. Male connector (108)
6. PCB transition connectors (6)

Description of hood/housing

1. for InduCom 9 (1)
2. incl. grommet set halves (5)
3. With internal earth (1)

Version

1. Side entry (17)
2. Top entry (27)
3. Top/side entry (14)
4. Versatile cable entries (3)

Filter

1. C-filter 3900 pF (2)
2. C-filter 47 pF (5)
3. Ferrite-filter (1)

Details

1. 12 pins on a comb (1)
2. AWG 28/7 - AWG 26/7,for IDC flat cable 1.27 mm (0.050") pitch (26)
3. AWG 28/7,for IDC flat cable 1.27 mm (0.050") pitch (7)
4. Cable clamp kit for two outputs is available as accessories (it includes: screw, metal clamp, plastic insert and grommet). With Part No. 09 67 001 9988 ten of these kits are delivered. (1)
5. Can also be used as a blanking cover (2)
6. for packaging density of 3 TE (15.24 mm) (9)
7. Hood provided with only one screw on the opposite side of the cable entry. (1)
8. Order 13 pieces per code comb (1)
9. Order 2 per male header.,for use with female connector connector with strain relief clamp (1)
10. Order 2 pieces for one connector. (8)
11. Order 2 pieces for one connector.,Only in conjunction with low-profile male header and strain relief (1)
12. Order 2 pieces for one connector.,Screws are not included within the delivery (1)
13. Order 2 pieces for one shell housing. (3)
14. Order knurled screw separately. (3)
15. Order knurled screw separately.,for packaging density of 3 TE (15.24 mm) (1)
16. Part number includes 2 keys at one connection (1)
17. Part number includes two dummy plugs (1)
18. Please order crimp contacts separately. (1)
19. Use of knurled screws is possible. Please order separately. (4)

Pack contents

1. 2 guide pins and sockets,4 fixing screws (3)
2. 250 bandoliered contacts (1)
3. 2500 bandoliered contacts (2)
4. 500 pieces in a box (1)
5. 500 pieces on a reel,Unrolling left (4)
6. Cable tie 1x,Open hood 1x,2x screw,Locking screw (09 06 000 9958) 2x (1)
7. Cable tie 2x,2x cable tie,2x screw,Screw M2.5 x 20 2x (1)
8. Packaging with 100 pieces (2)
9. Round cable insert 1x,Cable tie 1x,Dummy plugs A 1x,Dummy plugs B 1x (1)
10. Shell 1x,Cover 1x,Screw (09 06 000 9993),Locking washer 2.3 DIN 6799 2x (1)
11. Single contact (17)
12. Tube (11)

Ambient temperature

1. -20 ... +90 °C (20)
2. -30 ... +100 °C (4)
3. -35 ... +100 °C (8)
4. -35 ... +60 °C (2)
5. -40 ... +120 °C (5)
6. -40 ... +85 °C (1)
7. -55 ... +110 °C (8)
8. -55 ... +120 °C (8)

Limiting temperature

1. -20 ... +105 °C (1)
2. -20 ... +125 °C (2)
3. -25 ... +70 °C (2)
4. -30 ... +105 °C unmoved,-20 ... +105 °C moved (3)
5. -40 ... +105 °C (2)
6. -40 ... +125 °C (14)
7. -40 ... +85 °C (10)
8. -40 ... +90 °C (1)
9. -55 ... +105 °C (3)
10. -55 ... +125 °C (17)
11. -55 ... +125 °C (241)
12. -55 ... +125 °C (during reflow soldering max. +240 °C for 60 s) (2)
13. -55 ... +155 °C (7)
14. -55 ... +85 °C (4)

Insertion force

1. ≤ 10 N (1)
2. ≤ 109.5 N (1)
3. ≤ 123 N (9)
4. ≤ 167 N (3)
5. ≤ 183 N (1)
6. ≤ 30 N (21)
7. ≤ 41.25 N (2)
8. ≤ 46 N (5)
9. ≤ 5 N (1)
10. ≤ 50 N (18)
11. ≤ 51 N (2)
12. ≤ 57.75 N (1)
13. ≤ 7 N (15)
14. ≤ 71.25 N (3)
15. ≤ 82.5 N (3)
16. ≤ 83 N (13)

Withdrawal force

1. ≈ 2.5 N (1)
2. ≈ 5 N (7)
3. ≤ 7 N (8)
4. ≥ 11.55 N (1)
5. ≥ 14.25 N (3)
6. ≥ 16.5 N (3)
7. ≥ 2 N (1)
8. ≥ 21.9 N (1)
9. ≥ 3 N (2)
10. ≥ 36.6 N (1)
11. ≥ 8.25 N (2)

Test voltage U_r.m.s.

1. 0.5 kV (5)
2. 0.75 kV (12)
3. 0.75 kV @ 50 Hz (8)
4. 1 kV (211)
5. 1.2 kV (2)
6. 1.55 kV (17)
7. 2.5 kV (1)
8. 2.5 kV (contact-ground),1.55 kV (contact-contact) (11)
9. 3.1 kV (9)

Distance between rows

1. 2.54 mm (9)

Clearance distance

1. ≥ 0.7 mm (7)
2. ≥ 1 mm (64)
3. ≥ 1.2 mm (63)
4. ≥ 1.6 mm (16)
5. ≥ 3 mm (12)
6. ≥ 4 mm (1)
7. ≥ 4.1 mm (1)
8. ≥ 4.5 mm (8)

Creepage distance

1. ≥ 0.7 mm (7)
2. ≥ 1 mm (64)
3. ≥ 1.2 mm (63)
4. ≥ 3 mm (28)
5. ≥ 3.7 mm (1)
6. ≥ 8 mm (9)

Flange height

1. 5.7 mm (1)

PCB thickness

1. ‌1.6 mm ±0.2 ‌ (1)
2. ≥1.4 mm (11)
3. ≥1.6 mm (3)

Conductor cross-section

1. AWG 10 ... AWG 12 (1)
2. AWG 12 ... AWG 14 (2)
3. AWG 16 ... AWG 20 (4)
4. AWG 16 ... AWG 20 for FC 3 contacts (3)
5. AWG 18 ... AWG 22 (2)
6. AWG 20 ... AWG 24 (9)
7. AWG 20 ... AWG 26 for FC 2 contacts (4)
8. AWG 20 ... AWG 28 for BC contacts (2)
9. AWG 22 ... AWG 26 (2)
10. AWG 24 ... AWG 26 (4)
11. AWG 24 ... AWG 28 (6)
12. AWG 26 ... AWG 18 (1)
13. AWG 28 ... AWG 20 (1)
14. AWG 28 ... AWG 30 (1)

Material (hood/housing)

1. Metal (14)
2. Polycarbonate / Teflon (PTFE) (1)
3. Stainless steel (1)
4. Thermoplastic (37)
5. Zinc die-cast (2)

Colour (hood/housing)

1. Black (13)
2. Grey (8)
3. RAL 7032 (pebble grey) (12)

RoHS

1. compliant (382)
2. compliant with exemption (111)

ELV status

1. compliant (382)
2. compliant with exemption (111)

China RoHS

1. 50 (111)
2. e (382)

REACH Annex XVII substances

1. No (493)

REACH ANNEX XIV substances

1. No (493)

REACH SVHC substances

1. Lead (111)
2. No (382)

RoHS exemptions

1. 6a: Lead as an alloying element in steel for machining purposes and in galvanised steel containing up to 0.35 % lead by weight (25)
2. 6c: Copper alloy containing up to 4 % lead by weight (85)
3. 6c: Copper alloy containing up to 4 % lead by weight,6a: Lead as an alloying element in steel for machining purposes and in galvanised steel containing up to 0.35 % lead by weight (1)

Material (contacts)

1. Copper alloy (241)
2. PBFE / PBTP / PI,Copper alloy (8)

Material flammability class acc. to UL 94

1. V-0 (287)

Material (locking)

1. Copper alloy (15)
2. PI (1)

Packaging size

1. 1 (18)
2. 1,000 (7)
3. 10 (61)
4. 100 (204)
5. 104 (1)
6. 11 (2)
7. 13 (3)
8. 130 (2)
9. 135 (1)
10. 150 (1)
11. 2,500 (1)
12. 20 (94)
13. 200 (2)
14. 25 (10)
15. 27 (1)
16. 30 (4)
17. 39 (1)
18. 5 (1)
19. 50 (60)
20. 500 (13)
21. 52 (1)
22. 54 (1)
23. 60 (1)
24. 70 (1)
25. 80 (1)
26. 91 (1)

Country of origin

1. China (44)
2. Czechia (30)
3. Finland (4)
4. France (3)
5. Germany (212)
6. Hungary (22)
7. India (1)
8. Philippines (2)
9. Romania (16)
10. Sweden (15)
11. Switzerland (139)
12. Taiwan (2)
13. USA (3)

Specifications

1. DIN 41626 (6)
2. IEC 60603-2 (76)
3. IEC 60603-2 (complementary) (34)
4. IEC 61076-2-101 (1)
5. IEC 61076-4-113 (2)
6. IEC 61076-4-113 (complementary) (3)

UL / CSA

1. UL 1977 ECBT2.E102079 (90)
2. UL 1977 ECBT2.E102079,CSA-C22.2 No. 182.3 ECBT8.E102079 (190)
3. UL 2238 CYJV2.E302521,CSA-C22.2 No. 182.3 CYJV8.E302521 (1)

Operating current

1. < 10 A (1)
2. < 20 A (2)
3. < 40 A (1)
4. ≤ 10 A (5)
5. ≤ 20 A (2)
6. ≤ 30 A (1)

Degree of protection acc. to IEC 60529

1. IP20 (9)
2. IP30 (1)
3. IP67 (6)
4. IP67 when mated,IP65 when mated (1)

Colour (seal)

1. Red (1)